$234.55
By AquaStar Pool Products
Part # 3816-352
Manufacturer Code RWAV9102
Availability This Main Drain Has Been Recalled and is No Longer Available
************************************************
GENERAL DESCRIPTION: 9"X 9" SQUARE RETROFIT MAIN DRAIN COVER, BLACK************************************************
BASIC SPECS: SCREW HOLES: 1 IN THE CENTER OF EACH SIDE 2 OF THE SIDES HAVE 3 HOLES WITH 1 IN THE CENTER SEE BELOW FOR DETAILS USAGE: APPROVED FOR FLOOR OR WALL USAGE SPECS: SPECS SHOWN ARE FOR A SINGLE UNIT FLOOR: 224 GPM @ 1.6 FPS WALL: 224 GPM @ 1.6 FPS LIFE: 5 YEARS TOTAL OPENING: 44.2 SQ INCH 207 GPM @ 1.5 FPS************************************************
DETAILED DESCRIPTION: THIS IS A 9" X 9" SQUARE REPLACEMENT COVER THIS IS AN ANTI-ENTRAPMENT RETROFIT COVER AND SCREWS THIS HAS SCREW HOLES DESIGNED TO LET IT REPLACE A WATERWAY, HAYWARD OR PENTAIR 9" X 9" SQUARE COVER THIS HAS A REGULAR GRATED SHAPE BUT THE COVER SLOPES SLIGHTLY UPWARD FROM THE OUTSIDE TOWARD THE CENTER. THERE ARE A LARGE NUMBER OF SEMI-CIRCULAR EXTENSIONS RUNNING IN ONE DIRECTION ON TOP OF EACH GRATE. THIS HAS A ROUND CENTERPIECE WHICH CONTAINS THE VARIOUS LABELS REQUIRED BY THE VGB LAW EACH SIDE HAS A SQUARE NOTCH AT THE BOTTOM MATERIAL: PLASTIC COVER COLOR: BLACK SHAPE: SQUARE************************************************
COVER DIMENSIONS: COVER LENGTH & WIDTH: 8-13/16" (A) HEIGHT: 1-1/16" (AT THE OUTSIDE EDGE) MAXIMUM HEIGHT: 2" (AT THE CENTER OF THE COVER) (B) MAXIMUM HEIGHT ABOVE PLASTER LINE: THIS WILL DEPEND ON THE DEPTH OF THE FRAME (THE SIDE OF THE COVER IS FLUSH WITH A 1-1/16" DEEP FRAME AT THE EDGE) THE CENTER OF THE COVER IS 15/16" TALLER THAN THE EDGE************************************************
SCREW HOLES: THE COVER HAS SCREWS PLACED SO THE COVER WILL MATCH THE OLDER STANDARD WATERWAY, AND THE PENTAIR AND HAYWARD OLDER AND CURRENT FRAMES THERE IS ALSO AN 11/16" DEEP NOTCH, 5/8" WIDE IN THE CENTER OF EACH SIDE THE CENTERLINE OF EACH SCREW HOLE IS 5/16" FROM THE OUTSIDE EDGE OF THE COVER FROM THE CENTERLINE OF EACH SCREW HOLE TO THE CENTERLINE OF THE SCREW HOLE ON THE OPPOSITE SIDE IS 8-1/4". SCREW HOLE PLACEMENT: TOTAL SCREW HOLES - 8 THERE IS ONE SCREW HOLE IN THE CENTER OF EACH SIDE 2 OF THE SIDES HAVE AN ADDITIONAL 2 SCREWS EACH OF THESE IS 2-7/8" FROM THE CENTER HOLE MEASURED CENTER TO CENTER************************************************
SCREWS: THERE ARE COMPLETE SETS OF 3 DIFFERENT TYPES OF SCREW (4) #10 X 1-1/2" LONG SELF TAPPING (4) #10 X 3/4" LONG SELF TAPPING (4) #10-24 X 1-1/4" LONG MACHINE THREAD************************************************
MARKINGS: MODEL RWAV9 XXX IS MOLDED INTO THE CIRCULAR CENTER PIECE THE SPECS REQUIRED BY THE VGB-2008 LAW ARE ALSO MOLDED ON THE COVER
