$337.97
By AquaStar Pool Products
Part # 3816-365
Manufacturer Code WAV9105
Availability This Main Drain Has Been Recalled and is No Longer Available
************************************************
GENERAL DESCRIPTION: 9" X 9" SQUARE FRAME AND COVER, DARK GRAY************************************************
BASIC SPECS: SCREW HOLES: 1 IN THE CENTER OF EACH SIDE USAGE: APPROVED FOR FLOOR OR WALL USAGE SPECS: SPECS SHOWN ARE FOR A SINGLE UNIT FLOOR: 224 GPM @ 1.6 FPS WALL: 224 GPM @ 1.6 FPS LIFE: 5 YEARS TOTAL OPENING: 44.2 SQ INCH 207 GPM @ 1.5 FPS************************************************
THIS IS A 9" X 9" SQUARE COVER AND FRAME WITH SCREWS THIS HAS A REGULAR GRATED SHAPE BUT THE COVER SLOPES SLIGHTLY UPWARD FROM THE OUTSIDE TOWARD THE CENTER. THERE ARE A LARGE NUMBER OF SEMI-CIRCULAR EXTENSIONS RUNNING IN ONE DIRECTION ON TOP OF EACH GRATE. THIS HAS A ROUND CENTERPIECE WHICH CONTAINS THE VARIOUS LABELS REQUIRED BY THE VGB LAW EACH SIDE OF THE COVER HAS A SQUARE NOTCH AT THE BOTTOM IN THE CENTER OF EACH SIDE. THE FRAME HAS MATCHING SQUARE TABS WHICH CONTAIN THE SCREW HOLES. MATERIAL: PLASTIC COVER AND FRAME, STAINLESS STEEL SCREWS COLOR: DARK GRAY SHAPE: SQUARE************************************************
FRAME & COVER DIMENSIONS: TOTAL HEIGHT: 1-27/32" (B) FRAME ONLY HEIGHT: 29/32" FRAME LENGTH & WIDTH AT PLASTER LINE: 9-3/8" (A) FRAME MAXIMUM LENGTH & WIDTH AT BOTTOM: 10-17/32"************************************************
COVER DIMENSIONS: COVER OUTSIDE LENGTH & WIDTH: 8-7/8" COVER ONLY HEIGHT: 1-11/16" COVER EXTENDS 15/16" MAXIMUM ABOVE THE FRAME WHEN INSTALLED THE COVER IS 3/4" TALL AT THE EDGE. SPECIAL NOTE: THE WAV 9 X 9" COVER IS USED IN THIS FRAME AND COVER. THE RWAV 9 X 9 RETROFIT COVER IS TALLER AND HAS EXTRA HOLES. THE RWAV IS SOLD AS A REPLACEMENT COVER ONLY.************************************************
SCREW HOLES: TOTAL SCREW HOLES: 4 THERE IS A SCREW HOLE IN THE CENTER OF EACH SIDE THE CENTER OF THE SCREW HOLE IS 5/16" FROM THE EDGE FROM THE CENTERLINE OF EACH SCREW HOLE TO THE CENTERLINE OF THE SCREW HOLE ON THE OPPOSITE SIDE IS 8-1/4". THERE IS A 3/8" TALL X 5/8" LONG NOTCH JUST BELOW THE SCREW HOLE IN EACH SIDE. THIS NOTCH MATCHES THE CORRESPONDING TAB ON THE FRAME************************************************
SCREWS: 4 SCREWS - #10 X 3/4" LONG SS, SELF TAPPING PHILLIPS HEAD THESE ATTACH THE COVER TO THE FRAME************************************************
MARKINGS: WAV9-XXX IS MOLDED INTO THE TOP OF THE COVER IN THE CIRCULAR CENTER PIECE THE FRAME HAS NO MARKINGS THE SPECS REQUIRED BY THE VGB-2008 LAW ARE MOLDED ON THE COVER
