By AquaStar Pool Products


Details

Top

Part # 3816-605

Manufacturer Code 32CDAVFR105

Alternate Part #'s 32CDAVFR105

Product Description

INYO # 3816-605 AQUASTAR # 32CDAVFR105 THIS IS COMPLIANT WITH THE ASME/ANSI A112.19.8-2007 REGULATIONS AS SPECIFIED BY THE VIRGINIA GRAEME BAKER POOL AND SPA SAFETY ACT THIS IS A VGB-2008 COMPLIANT FRAME AND COVER THIS IS CONSIDERED TO BE AN UNBLOCKABLE FRAME AND COVER

************************************************

GENERAL DESCRIPTION: 32" CHANNEL FRAME AND AV COVER, DARK GRAY

************************************************

BASIC SPECS: USAGE: APPROVED FOR FLOOR OR WALL USAGE SPECS: SPECS SHOWN ARE FOR A SINGLE UNIT FLOOR: 236 GPM @ 3.4 FPS WALL: 136 GPM @ 1.9 FPS LIFE: 5 YEARS TOTAL OPENING: 22.6 SQ INCH 105.5 GPM @ 1.5 FPS

************************************************

DETAILED DESCRIPTION: THIS IS A 32" CHANNEL FLATE COVER, FRAME AND SCREWS THIS IS AN ANTI-ENTRAPMENT FRAME, COVER AND SCREWS THIS IS AN UNBLOCKABLE COVER FRAME AND SCREWS THIS IS VERY LONG SLENDER CHANNEL FRAME AND COVER. THIS IS ABOUT 32" LONG WITH STRAIGHT SIDES AND ROUNDED ENDS THIS CONSISTS OF A FRAME, FLATE COVER, SCREWS, AND SUPPORTS. THERE ARE 4 CROSSPIECE SUPPORTS WHICH ATTACH TO THE FRAME WHEN IT IS BEING INSTALLED. THESE KEEP THE SIDES OF THE FRAME STAIGHT FOR INSTALLATION. ONCE THE FRAME IS INSTALLED, THESE ARE REMOVED AND REPLACED WITH THE COVER MATERIAL: PLASTIC COVER COLOR: DARK GRAY SHAPE: CHANNEL

************************************************

FRAME & COVER DIMENSIONS: TOTAL HEIGHT: 1-9/16" FRAME ONLY HEIGHT: 1-1/4" FRAME LENGTH AT PLASTER LINE: 32-1/4" (A) FRAME WIDTH AT PLASTER LINE: 3-1/2" (B) FRAME MAXIMUM LENGTH : 32-13/16" FRAME MAXIMUM WIDTH: 4-1/16" THE FRAME ONLY EXTENDS 7/8" BELOW THE PLASTER LINE

************************************************

COVER DIMENSIONS: COVER LENGTH: 32" COVER WIDTH: 3-1/4" COVER ONLY HEIGHT: 11/16" COVER MAXIMUM HEIGHT ABOVE PLASTER LINE: 5/16"

************************************************

SCREW HOLES: THERE ARE 8 HOLES TOTAL, WITH 4 ON EACH SIDE THE ENDS SETS OF SCREW HOLES ARE 2-3/4" FROM THE COVER END AT THE HOLE CENTER THE MIDDLE SETS OF HOLES ARE 8-13/16" FROM THE END SETS CENTER TO CENTER EACH SCREW HOLE IS 2-3/4" FROM THE OPPOSITE HOLE AT THE CENTER OF EACH HOLE

************************************************

SCREWS: 8 SCREWS - #8 X 3/4" LONG SS, SELF TAPPING PHILLIPS HEAD THESE ATTACH THE COVER TO THE FRAME

************************************************

MARKINGS: AQUASTAR - MODEL # 32CDAV - XXX IS MOLDED INTO THE TOP OF THE COVER AT THE EDGE THE FRAME HAS NO MARKINGS THE SPECS REQUIRED BY THE VGB-2008 LAW ARE MOLDED ON THE COVER