Product Description

WGX1031B HAS BEEN  REPLACED WITH  WGX1031BHF2

INYO # 3811-011 HAYWARD # WGX1031B THIS IS COMPLIANT WITH THE ASME/ANSI A112.19.8-2007 REGULATIONS AS SPECIFIED BY THE VIRGINIA GRAEME BAKER POOL AND SPA SAFETY ACT THIS IS A VGB-2008 COMPLIANT COVER

************************************************

GENERAL DESCRIPTION: 9"X 9" SQUARE RETROFIT MAIN DRAIN COVER, WHITE

************************************************

BASIC SPECS: 9" X 9" REPLACEMENT COVER WITH INNER FRAME THIS WILL REPLACE THE CURRENT AND OLDER 9" X 9" COVERS BUT THE SCREW HOLES ARE QUITE DIFFERENT FROM THE ORIGINAL USAGE: APPROVED FOR FLOOR OR WALL USAGE SPECS: SPECS SHOWN ARE FOR A SINGLE UNIT FLOOR: 112 GPM WALL: 83 GPM LIFE: 7 YEARS TOTAL OPENING: 17.81 SQ INCH 83.3 GPM @ 1.5 FPS

************************************************

DETAILED DESCRIPTION: THIS IS A 9" X 9" SQUARE REPLACEMENT COVER THIS IS AN ANTI-ENTRAPMENT RETROFIT COVER, INNER FRAME, AND SCREWS THE COVER IS SQUARE WITH GRATED OPENINGS AROUND THE EDGE AND A LARGE NUMBER OF ROUND HOLES IN THE TOP. THE COVER IS ROUNDED AND SLOPES TOWARD THE TOP THE COVER ATTACHES TO AN INNER FRAME WHICH ITSELF IS ATTACHED TO THE MAIN FRAME OF THE MAIN DRAIN. MATERIAL: PLASTIC COVER COLOR: WHITE SHAPE: SQUARE

************************************************

COVER DIMENSIONS: COVER OUTSIDE LENGTH & WIDTH: 8-7/8" (A) COVER ONLY HEIGHT: 1-3/4" (B) COVERS EXTEND 1-1/2" MAXIMUM ABOVE THE MAIN FRAME WHEN INSTALLED

************************************************

SCREW HOLES: THE COVER IS ATTACHED TO THE INNER FRAME USING 4 OF THE #10-24 MACHINE THREAD 1" LONG SCREWS PER COVER, NEAR THE CORNER OF EACH COVER. FROM THE CENTERLINE OF EACH SCREW HOLE TO THE CENTERLINE OF THE SCREW HOLE ON THE OPPOSITE SIDE IS 7-3/4". THE INNER FRAME HAS 8 SCREW HOLES SLIGHTLY OVER 1-1/2" FROM THE CORNERS THE INNER FRAME ATTACHES TO THE MAIN FRAME USING 4 OF THESE HOLES

************************************************

SCREWS: ALL OF THE SCREWS ARE INLCLUDE IN A SINGLE PACKAGE THE HAYWARD PART # FOR THE SCREW PACKAGE IS WG1030Z8A 4 - #13-9 X 5/8" SELF TAPPING SCREWS (ATTACH INNER FRAME TO MAIN FRAME) 4 - #10-24 X 15/16" MACHINE SCREWS (ATTACH COVER TO INNER FRAME)

************************************************

MARKINGS: HAYWARD WG1031B IS MOLDED INTO THE COVER WG1031F IS MOLDED INTO THE INNER FRAME THE SPECS REQUIRED BY THE VGB-2008 LAW ARE ALSO MOLDED ON THE COVER

Review Summary