Product Description

INYO # 3816-623 AQUASTAR # 32CDAV103 THIS IS COMPLIANT WITH THE ASME/ANSI A112.19.8-2007 REGULATIONS AS SPECIFIED BY THE VIRGINIA GRAEME BAKER POOL AND SPA SAFETY ACT THIS IS A VGB-2008 COMPLIANT FRAME AND COVER THIS IS CONSIDERED TO BE AN UNBLOCKABLE FRAME AND COVER

************************************************

GENERAL DESCRIPTION: 32" CHANNEL SUMP AND AV COVER, LIGHT GRAY

************************************************

BASIC SPECS: USAGE: APPROVED FOR FLOOR OR WALL USAGE SPECS: SPECS SHOWN ARE FOR A SINGLE UNIT FLOOR: 236 GPM @ 3.4 FPS WALL: 136 GPM @ 1.9 FPS LIFE: 5 YEARS TOTAL OPENING: 22.6 SQ INCH 105.5 GPM @ 1.5 FPS

************************************************

DETAILED DESCRIPTION: THIS IS A 32" CHANNEL TYPE SUMP, AV COVER AND SCREWS THIS IS AN ANTI-ENTRAPMENT CHANNEL TYPE SUMP, AV COVER AND SCREWS THIS IS AN UNBLOCKABLE CHANNEL SUMP, AV COVER AND SCREWS THIS IS VERY LONG SLENDER CHANNEL TYPE SUMP AND COVER. THIS IS ABOUT 32" LONG WITH STRAIGHT SIDES AND ROUNDED ENDS THIS CONSISTS OF A SUMP, AV COVER, AND SCREWS THE SUMP HAS 3 OUTLET PORTS ON THE BOTTOM. THE PORTS ARE 2-1/2" SPG X 2" SLIP AT THE BOTTOM AND HAVE 2" FPT THREADS AT THE TOP. 2" PVC PIPE CAN BE GLUED INSIDE AND A 2-1/2" FITTING CAN BE GLUED ON THE OUTSIDE FOR USE WITH 2-1/2" PVC PIPE. THE 2" FEMALE THREADS ON TOP ALLOW ANY OF THE PORTS TO BE EITHER LEFT OPEN OR PLUGGED. (2) 2" MPT PLUGS ARE INCLUDED MATERIAL: PLASTIC COVER AND SUMP, STAINLESS STEEL SCREWS COLOR: LIGHT GRAY COVER, BLACK SUMP SHAPE: CHANNEL

************************************************

SUMP & COVER DIMENSIONS: TOTAL HEIGHT: 5-3/4" SUMP ONLY HEIGHT: 5-7/16" LENGTH AT PLASTER LINE: 32-1/4" (A) WIDTH AT PLASTER LINE: 3-1/2" (B) SUMP MAXIMUM LENGTH : 32-11/16" SUMP MAXIMUM WIDTH: 3-7/8" THE SUMP BODY EXTENDS 3" BELOW THE PLASTER LINE THE BOTTOMS OF THE PORTS EXTEND 5-3/8" BELOW THE PLASTER LINE PORTS: 3 PORTS - 2" SLIP X 2-1/2" SPG ONE PORT IS IN THE CENTER OF THE BOTTOM THE OUTSIDE PORTS ARE 10" AWAY FROM THE CENTER PORT MEASURED AT THE CENTERLINE

************************************************

COVER DIMENSIONS: COVER LENGTH: 32" COVER WIDTH: 3-1/4" COVER ONLY HEIGHT: 11/16" COVER MAXIMUM HEIGHT ABOVE PLASTER LINE: 5/16"

************************************************

SCREW HOLES: THERE ARE 8 HOLES TOTAL, WITH 4 ON EACH SIDE THE ENDS SETS OF SCREW HOLES ARE 2-3/4" FROM THE COVER END AT THE HOLE CENTER THE MIDDLE SETS OF HOLES ARE 8-13/16" FROM THE END SETS CENTER TO CENTER EACH SCREW HOLE IS 2-3/4" FROM THE OPPOSITE HOLE AT THE CENTER OF EACH HOLE

************************************************

SCREWS: 8 SCREWS - #8 X 3/4" LONG SS, SELF TAPPING PHILLIPS HEAD THESE ATTACH THE COVER TO THE SUMP

************************************************

MARKINGS: AQUASTAR - MODEL # 32CDAV - XXX IS MOLDED INTO THE TOP OF THE COVER AT THE EDGE THE SUMP HAS P/N 32CDSB - 101 THRU 108 MOLDED INTO IT THE SPECS REQUIRED BY THE VGB-2008 LAW ARE MOLDED ON THE COVER

Review Summary