Details

Top

Part # 9710-102

Manufacturer Code 52498

Alternate Part #'s 2000LER1E, 25504, 52295-01, 52297, 52498, 52498-01, 54447, HS200R1E, 52295, 59-138-1007, BB5249801

Product Description

INYO # 9710-102 BALBOA # 52498-01

************************************************

GENERAL DESCRIPTION: RECTANGULAR CIRCUIT BOARD GREEN BOARD COLOR THIS IS A CIRCUIT BOARD MADE BY BALBOA USED ON SOME HYDRO SPA SYSTEMS

************************************************

DIMENSION: LENGTH: 9-3/4" WIDTH: 6"

************************************************

CONNECTORS: 2 SPASIDE CONNECTORS ON THIS BOARD EACH SPASIDE CONNECTOR IS A FEMALE 8 PIN PHONE PLUG STYLE

************************************************

MARKINGS: MAIN CHIP: HS200RIE

Top

?     Asked on 11/7/2015by Jody

So if my chip #HS200R1D will this board work for me?
 Reply

A  Answered on 11/9/2015 by InyoPools Product Specialist Charlie R.

Jody,Yes, part #s HS200R1D & HS200R1E are interchangeable and should work for you.
 Reply


?     Asked on 5/1/2017by Eric

My chip # is HS200R1C board # 52498, is this compatible?
 Reply

A  Answered on 5/2/2017 by InyoPools Product Specialist Lennox H.

Hi, Eric. Yes, this Hydro Spa Board -52498 is compatible with the board you have.
 Reply


?     Asked on 6/11/2017by Rich

I have a 52497-05 Model 200. Is this compatable? It looks very different. Does it include directions on how to match plugs if it is compatible?
 Reply

A  Answered on 6/22/2017 by InyoPools Product Specialist Lennox H.

Hi, Rich. This Hydro Spa HS200 Board will replace p/n 52497.  A wiring diagram can be downloaded Balboa Model 2000LE System Wiring Diagram.
 Reply


?     Asked on 1/3/2019by Tim

I have a Model HS 200 circuit board P/N 52497-05 Will this one work
 Reply

A  Answered on 1/3/2019 by InyoPools Product Specialist Kevin G.

Yes, this part will work for you.
 Reply


?     Asked on 2/5/2020by Mike

I have a Balboa 52498 in my Hydrospa. I keep getting a chronic sn code. Replaced the hi limit and temp sensors. The code is not immediate, sometimes once a day to once every 4 days. Can be reset by shutting the spa down and turning it back on. Good water flow. Have been told cod be a number of things from possibly a voltage problem from the ozone to the thermostat, to the board. Just restarted the spa after 1 year of no use. Any ideas would be appreciated. Thanks!!
 Reply

A  Answered on 2/12/2020 by Industry Professional

You can try cleaning the ends of the sensor plug and the board pins with rubbing alcohol and q-tips. Second, low water flow or a suction leak can cause this issue.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)