Part # 4742-014
Manufacturer Code WVD001
Dimensions 16" L x 9.25" W x 23.75" D
Waterway Multiport Valve 2" FPT (D.E.) - WVD001
I need parts for my filter valve. When I look at the filter parts breakdown, it gives me different choices. How do I know which one is the one I need?
Reply
In order to locate the correct parts we will need to know the model number of the filter valve. Two identical filters can have two different valves. Typically the valve model will be located on the label of the valve. If there is no model number on the valve, you can try to see if there are any part numbers on the valve itself. Once you've located you valve model you can check out our >Filter Valve Parts.
Reply
I have a Crystal Water/Aqua Clean DE filter P/N 570-060 and the existing multiport valve is Model SM20-1. However, it looks just like this multiport valve. Is this the same part?
Hi Jerry, yes this would be the proper replacement valve for your Crystal Water/Aqua Clean DE filter P/N 570-060
Reply
Not sure if I need the WVD001 or WVD002. Couldn't find a picture with FPT.
Reply
The only difference is where the ports on the valve from the pump, if those have internal threads then you need the WVD001 and the pipe just slips in then you will need the WVD002.
Reply
I have a Pentair 27-1141 ( I think this is the model #) multi port valve. Will this one work for me?
Could you send us a few photos of your filter to include the filter label which shows the model # of your filter? Also are there any #'s on the valve which start with SM or PP? To supply photos or additional model number information simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
Hello! Here are the additional pics. It looks like the filter is a FNS plus 60. Thanks for the help!
Hi Barbara, Thank You for the photos those are super helpful! You will require this Pentair 261177 FNS Plus Replacement Valve
Reply
Will this work on a Sta-Rite System 3 D.E. S8D110?
Hi James, No this is not the correct replacement valve. You will need this S8D110 2" Replacement Valve
Reply
Less than 1 hr
Saw. To remove old glued in pipes
After replacing multi port valve gasket as a temporary fix, had to purchase new multi port valve through inyopools. Cut off inlet pipes and purchased new 1/12 to 2 inch pipe fittings to reassemble. Easy peasy. Works great!