By Custom Molded Products
Part # 5036-265
Manufacturer Code 27203-300-300
Dimensions 4.5" L x 3.5" W x 5" D
INYO # 5036-265 CUSTOM MOLDED PRODUCTS # 27203-000-300 THIS IS A 3 HP IMPELLER USED ON THE 3 HP CMP WET END GRAY OR BLACK PLASTIC IMPELLER INCLUDES: IMPELLER ONLY CLOSED FACE NUMBER OF VANES: 7 OUTSIDE DIAMETER: 4-7/16" THICKNESS: 11/16" (OUTSIDE THICKNESS AT OUTSIDE EDGE) THICKNESS: 7/16" (B) (INSIDE THICKNESS AT OUTSIDE EDGE) FRONT TO BACK: 3-3/32" (FROM END OF SHAFT TO FRONT ON INTAKE) INLET OUTSIDE DIAMETER: 2-1/8" INLET INSIDE DIAMETER: 1-7/8" SHAFT COVER LENGTH: 1-1/2" SHAFT COVER OD 5/8" (THIS IS WHERE THE IMPELLER SCREWS ONTO THE MOTOR SHAFT) MARKINGS: 27203-000-300 IS MOLDED INTO THE IMPELLER FACE SHAFT SEAL USED WITH THIS IMPELLER OPT # 5250-104 GENERIC # PS-200 OR AS-200
