Details

Top

Part # 94089192

Alternate Part #'s 9408-9192, 94089192, L192-C7, L192C7

Product Description

Inyo Recommended Filters

 

Jacuzzi Laser Sand Filter

Features:

  • Three Models available 19" (48,3 cm), 22,5" (57,2 cm) and 25" (63,5 cm) models.
  • Upper distribution system integrated into the dial valve and engineered to direct water evenly across the entire surface of the sand – up to 25 gpm/sq.ft. (61 m 3 /h/m 2 ) without sand migration or channeling.
  • 7-way Dial Valve with "sight glass", automatic air relief, and pressure gauge. The 7 functions include : Filter, Backwash, Rinse, Whirlpool, Drain, Test & Winterize.
  • Non-Corrosive Resin Clamp for simple installation and service of dial valve and filter components.
  • Underdrain with "side-slotted" laterals draws water evenly across the full diameter of the sand bed for higher flows, better filtration, longer cycles and more efficient backwashing. Features heavy-duty, freeze resistant hub and easy-service "Snap-Fit" laterals.
  • Deep, high-capacity sand bed carries more debris and extends filter cycles.
  • Blow-molded tank is corrosion-resistant, and UV-resistant.
  • Bottom drain for winterizing and draining.

Dimensions:

Performance:

Product Specifications

Tank Diameter:
19 in.
Pipe Size:
1-1/2" in.
Top

?     Asked on 1/27/2012by Guest

When should I change the sand in my filter?
 Reply

A  Answered on 1/27/2012 by InyoPools Product Specialist Patrick P.

You should change the sand in your filter every 5-7 years. You can generally tell that it is time if your pool water is not as clear as it normally is or when you notice the interval between backwashes is shorter. You can use > this guide to walk you through it.
 Reply


?     Asked on 5/14/2015by Christina

Is this for above ground or inground?
 Reply

A  Answered on 5/14/2015 by InyoPools Product Specialist Patrick P.

Hi Christina, The 19" Jacuzzi Laser Sand Filter can be used on either Inground or Aboveground Pools.
 Reply


?     Asked on 5/14/2015by Christina

I currently have a Jacuzzi Laser sand filter model 190L, would this be close to the same?
 Reply

A  Answered on 5/14/2015 by InyoPools Product Specialist Wes B.

Yes, It is just a newer model of the current filter you have now.
 Reply


?     Asked on 5/24/2015by Marilyn Gaffin

We have had the same Jacuzzi filter for 15 years, and don't know how long previous owners had it. We need to replace it and I believe theL192C-7C will be correct for us, however I don't understand all these dimensions. our pool is 22,000 gallons. Do you think this is a good one for me to purchase? I cannot start our pool even though I have cleaned and filled it. We did buy a new Hayward pump last year, thinking that might be the problem. I think the filter is just to old. Please help
 Reply

A  Answered on 5/24/2015 by InyoPools Product Specialist Patrick P.

Hi Marilyn, for a 22,000 gallon pool I would suggest the next size larger filter which is the Jacuzzi Laser L225-7C. The larger filter will ensure that you do not put too much stress on your pump and will mean longer time between filter cleanings.
 Reply


?     Asked on 6/14/2015by Inyo Visitor

I have a 1 1/2 horse power pump. Will this work with the 160 top Mount Sand filter?
 Reply

A  Answered on 6/14/2015 by InyoPools Product Specialist Patrick P.

For a 1-1/2 HP pump we would suggest the 22-1/2" Jacuzzi Laser Sand Filter.
 Reply