Product Description

Need help finding the right cable? Here is one way you can tell.

Generally if your cord installs through the TOP of the cleaner, it takes a cable with part numbers ending in -DIY.  These cords come with the motor plug already attached and the opening on the cleaner housing itself is large enough for this type of plug to go through.

If your cord installs through the SIDE of the cleaner, it takes a cable with part numbers ending in -ASSY.  These cords have RAW wire ends and require a Retrofit Kit to attach the cable to the motor.  Generally the opening on the cleaner housing itself is too small for the cord to go through with the plug on the end and therefore the wires need to be threaded through the opening first and the plug installed after.

18M Cable with Amphenol Plug and RAW WIRES 

Used on the following Maytronics Dolphin Robotic Pool Cleaners:

*** You will need a 9991279 Retrofit Kit for this Cable ***

• Advantage
• COM - Commander
• Sprite
• Interactive
• Explorer 2001
• DX3
• DX5 Cl1
• Deluxe Cl1
• Orion
• Supreme M3
• Nautilus
• Endeavor
• Atlantis
• Saturn
• Quest