By Maytronics
Part # 3295-079
Manufacturer Code 9995665-ASSY
Dimensions 9.75" X 8.625"
INYO # 3295-079 MAYTRONICS # 9995665-ASSY GENERAL DESCRIPTION: THIS IS THE POWER SUPPLY USED ON SOME DOLPHIN CLEANERS MATERIAL: THE BASIC BODY IS A VERY LIGHT GREEN GRAY PLASTIC COLOR THE BASE HAS AN ALUMINUM HEAT SINK BUILT IN THERE IS A HANDLE TO CARRY THIS WITH BUILT INTO THE TOP. ON THE FRONT LEFT IS AN ON/OFF SWITCH ON THE LOWER RIGHT SIDE IS A PLUG IN FOR THE CLEANER CABLE. THIS PLUG IN HAS 4 SMALL ROUND FEMALE CONNECTORS. THE PLUG IN INCLUDES AN ATTACHED COVER FOR USE WHEN THE CABLE IS NOT CONNECTED. ON THE FRONT OF THE UNIT THERE IS YELLOW "FILTER" LIGHT A GREEN "ON" LIGHT, AND A RED "RESET" BUTTON THERE IS A 7-1/2 FT. CORD WITH A NEMA 3-PRONG GROUNDED PLUG. DIMENSION: WIDTH: 9-3/4" (A) FRONT TO BACK: 6" HEIGHT: 8-5/8" (B) MARKINGS: THERE IS A LABEL ON THE BACK WITH THESE MARKINGS TYPE: DYNAMIC DC P.NO. 9995665EL INPUT: 115 VAC 60HZ 160W OUTPUT: DC 30V NOMINAL
I need a part for my Dolphin pool cleaner but I don't see it on the parts breakdown. Is there still a chance you may still have it?
Reply
The manufacturer which is Maytronics, does not offer all parts for sale. If you don't see a part on the breakdown you can give us a call. For parts that they do not consider "DIY (do it yourself), you will need to contact them and send in the cleaner for repair.
Reply
I have a dolphin dynamic prox 2 can you use any power supply on these cleaners or are they specific to a certain power supply?
Reply
Hi Johnathan, this is the correct power supply for the Maytronics Dolphin Pro X 2 robotic pool cleaner.
Reply
