$10.03

Qty:

By Custom Molded Products


Details

Top

Part # 21063-154-000

Dimensions 2" X 1-1/2" X 4-1/2"

Alternate Part #'s _21063-154-000, CMP21063-154-000, CMP21063154000

Product Description

Hi-Temp Self-Sealing Unions

  • High-Temperature Noryl Material
  • Self-Sealing
  • No Teflon Tape or Pipe Dope Required
  • T-Gasket for Better Sealing
  • 1.5” MIP Union
  • 1.5” Slip Tailpiece
Top

?     Asked on 7/10/2014by Guest

I have 2" pvc plumbing, however the ports on my pool pump are 1.5" female threads, what would be the correct union for this set up?
 Reply

A  Answered on 7/10/2014 by InyoPools Product Specialist Patrick P.

This union here would be the correct union, the 1.5" male threads on the union would screw into the 1.5" female threads of your pump and the 2" plumbing would slip onto the smooth 2" portion of this union. These unions make it very easy to remove your pump quickly and allows you not to have cut into your plumbing if you need to remove your pump.
 Reply


?     Asked on 11/15/2015by Eugene

What is thread size of the union male part?
 Reply

A  Answered on 11/17/2015 by InyoPools Product Specialist Charlie R.

Eugene,The threaded male end is 1.5".
 Reply


?     Asked on 5/24/2017by Chris

I have an above ground pool with a Sta Rite DE filter PLD 50 I'm replacing pump with your NE6170B is this the right union?
 Reply

A  Answered on 5/28/2017 by InyoPools Product Specialist Lennox H.

Hi, Chris. Yes, this union can be used with the NE6170B pump. The PLD50 unit has 2" ports so you will have to use a reducer depending on the size pvc you're using.
 Reply


?     Asked on 3/26/2018by vi barnett

Are the threads fine enough to fit a 1.5" galvanized T?
 Reply

A  Answered on 3/26/2018 by InyoPools Product Specialist Joe S.

Good day, the Union 1.5" Male Threaded x 1.5" Slip - 21063-154-000 has a coarse thread and will not fit into a galvanized fitting.
 Reply


?     Asked on 4/19/2018by Roger

Will the threads on this union accept the intex flexible hoses?
 Reply

A  Answered on 4/20/2018 by InyoPools Product Specialist Lennox H.

Hi, Roger. Unfortunately, it will not. 
 Reply


Top
Difficulty

Est. Repair Time

More than 8 hrs

Tools Needed

Pliers, Adjustable Wrench

Outlet Leaked Like Crazy when Pump Warmed Up

Written on 4/22/2019 by Guest

I bought two; one for inlet and one for the outlet. The inlet (suction) side was an easy connection but the outlet started a slight drip at startup. As the pump warmed and the sun beat down on the connection, the leak got worse. I tried tightening the connection but it made it worse.

The second day, I loosened the connection and it seemed to stop, but when the fitting was warmed by the pump, it leaked. I was about to buy another (replacement) but went back to the old tried but true screw in 1 1/2" fitting with 2-inch outlet and glued it together. No more problems!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set, Adjustable Wrench

Installed a New Pureline Pump

Written on 2/12/2019 by Guest

The union connectors are great for later servicing. It's easy to disassemble or replace the pump.

I moved to a new home and ordered a new Pureline pump and will convert from chlorine to salt. My new salt kit and Pureline pump are in the garage, waiting for a break in the weather to install. I love dealing will Inyo Pools.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
9 Rating
5 star:
 
(9)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews