Details

Top

Model # SR500PS

Alternate Part #'s STI-SR500PS, STP-42-1007

Product Description

SR-500 PS Pool/Spa Combination Stingl Switch (Safety Vacuum Release System)

The Model SR-500PS is specifically designed for Residential Pool/Spa combinations that share one common pump, and still provides the same reliable vacuum entrapment detection capabilities as the Model SR-500 Stingl Switch.

The SR-500PS is equipped with 2 “New Features"

  • 2 Vacuum memory settings - one for the pool, and one for the spa

  • Dry contact input – for total automation used in conjunction with any remote system (such as a Jandy RS)



Features and Benefits:

  • Complies with ASME/ANSI 112.19.17 as required by the International Building Codes (IBC) and the International Residential Codes (IRC)
  • Meets all current codes and standards for SVRSs on new and existing pools and spas
  • Can act as pool controller with programmable timer, or as stand alone SVRS working in conjunction with existing pool controller
  • Newest state-of-art NEC microprocessor technology-- guaranteed reliability and performance
  • Vacuum monitored 128 times per second -- rapid response and accurate readings
  • Power monitored 50/60 times per second -- insures continuous power detection
  • Can act as a pool and spa controller - with fully programmable 24 hour timer, or as stand alone SVRS working in conjunction with existing pool and spa controller
  • Integrates with existing timer box - (for easy retrofit)
  • Low vacuum sensing - (prevents cavitations or running the pump dry, eliminating costly equipment failure)
  • 30 minute maintenance override - (for pool or spa service)
  • Accessible extra dry contact – auxiliary equipment can be add ready added
  • Power back-up – insures settings and reading will be saved (30 minute rapid recharge)
  • Display error readout - (prevents guessing during troubleshooting)
  • Works on all size pumps
  • Easy and trouble free installation - (no pipes to cut or glue)
  • Turns off pump in milliseconds upon detecting sudden vacuum change
  • Multiple audible alarm capabilities – allows for quicker alert to harmful to harmful situations
  • Provides a layer of protection, reducing entrapment risk
Top

?     Asked on 9/28/2012by Guest

Does the SR-500PS Pool and Spa Combo System require a variable or dual speed pump?
 Reply

A  Answered on 9/28/2012 by InyoPools Product Specialist Patrick P.

No. This system can be used with any pool pump type.
 Reply


?     Asked on 12/28/2012by Guest

When the system is hooked up, will a change in pressure such as hooking up a vacuum line, leaves in skimmer basket, etc shut the pump off?
 Reply

A  Answered on 12/28/2012 by InyoPools Product Specialist Patrick P.

The Stingl Switch SR500 monitors the vacuum on the influent side of the pool or spa pump. Whenever a blockage occurs in the pool drain or skimmers, the sudden rise in vacuum will cause the Stingl Switch to immediately shut down the pump and activate an audible alarm. The pump will remain off and the alarm will sound until manually reset. The Stingl Switch provides a 30-minute Maintenance/Cleaning mode to allow pool vacuuming. Normally, the high vacuum generated by pool vacuuming would cause it to sense an entrapment condition and shut off the pump. However, in  Maintenance/Cleaning mode, the switch is deactivated and the pump is allowed to run under a high vacuum situation.
 Reply


?     Asked on 12/28/2012by Guest

Does the Stingl Switch come with the emergency shutoff switch?
 Reply

A  Answered on 12/28/2012 by InyoPools Product Specialist Patrick P.

There is a switch on the SR500 Stingl Switch panel that will kill the pump.
 Reply


?     Asked on 12/28/2012by Guest

If I install this switch, do I still need an emergency shutoff out by the pool?
 Reply

A  Answered on 12/28/2012 by InyoPools Product Specialist Patrick P.

An emergency shutoff is not required once there is a safety vacuum release system installed. However, different parts of the country have different codes so you should double check what is required by your local code.
 Reply