By Pureline


Details

Top

Part # PL7791

Warranty 2 Year warranty

Alternate Part #'s CPSC24AMCELL, JD363130C

Product Description

Save 30% by replacing your CompuPool® Salt Cell with INYOpools.com

The PL7791 is an after-market replacement electrode only for the CompuPool® CPSC24 salt chlorine generator. CompuPool® systems are economically designed so you can replace the electrode without replacing the clear blue housing. This is an after-market salt cell by Pureline® and not the original salt cell by Compupool®. This salt cell is compatible with the Compupool® CPSC24 model.

  • Chlorine output: 240 mL/hour
  • Electrode for CPSC24 model only (for pools up to 26k gallons)
  • Also replaces CircuPool® RJ30 and CompuPool®/CompuChlor® CPSC24

Disclaimer:

All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.

Product Specifications

Manufacturer:
Pureline
Treatment Capacity:
26,000 gal.
Top

?     Asked on 7/7/2011by Guest

Do you sell the housing for the compupool CPSC24?
 Reply

A  Answered on 7/7/2011 by InyoPools Product Specialist Steve M.

Yes we do sell the housing which is the same for all of the CompuPool CPSC units, this housing can be purchased here >http://www.inyopools.com/Products/16401352060535.htm
 Reply


?     Asked on 1/29/2015by Inyo Visitor

Is there an alternative replacement for this cell??
 Reply

A  Answered on 1/29/2015 by InyoPools Product Specialist Cleveland M.

There is no alternative replacement for this cell. 
 Reply


?     Asked on 3/8/2015by Inyo Visitor

I have a CPSC 18 COMPU-CHLOR II. Would you sell a cell for remplacement on this model? Otherwisez is it possible to adapt a CPSC24 or similar reference on mine ?
 Reply

A  Answered on 3/9/2015 by InyoPools Product Specialist Wes B.

Hi,Compu-Pool does not make a replacement for your CPSC 18, You can use the CPSC 24 electrode for your system,you want to make sure if you decide to go with the 24 that you go into your maintenance settings on your control pad and change the amps from 15 to 20 for the cell to work properly.Best Regards Wes B.
 Reply


?     Asked on 4/19/2015by Bill Blackwood

Why don't you sell the grid and cable for a reasonable price together since that is where the failure is ?
 Reply

A  Answered on 4/20/2015 by InyoPools Product Specialist Robert M.

Hello Bill - We do carry the complete cell. The part number is JD363130C-COMPL.
 Reply


?     Asked on 4/29/2015by Inyo Visitor

I have either polarity 1 or 2 on and the water fault is also on, the cell has just been cleaned and I still have the same problem, does this indicate the cell needs to be replaced ?
 Reply

A  Answered on 4/30/2015 by InyoPools Product Specialist Patrick P.

These faults often indicate that you have a loose connection at the head of the cable attached to the cell. Try slightly crimping the female connectors that attach to the three cell posts. If this doesn't work, give Compupool a call at 888-989-7258 and talk to one of their tech reps.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

1     0

Our salt chlorinator rusted out and quit

Written on 8/22/2019 by Guest

I Googled the problem, found that the fix was easy enough as a DIY project and ordered the salt cell from Inyo. The package arrived quickly and the salt cell was a perfect fit. It has been running all summer and is working great. Don't forget to maintain the cell periodically too keep the cell plates clean and producing efficiently.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Adjustable Wrench

1     1

Needed to replace salt cell

Written on 7/23/2019 by Guest

Put the cell on housing and added collar qnd housing and connected it back to my pool system.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
5 Rating
5 star:
 
(5)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews