By Wilbar

High Return Item
This item is often ordered incorrectly. Please verify details or contact support.

Details

Top

Part # 19186

Alternate Part #'s 27393

Product Description

Top Cap  Pewter Gray (Single)  NO LONGER AVAILABLE REPLACED BY 27393 (CHAMAGNE).  The substitute part# is beige in color.   The matching Top Cap support in Champagne is part# 27392

NEED TO BUY SEVERAL TOP CAPS?  Top Cap 8" Champagne (10 pack) SAVE $!!

Used With:

Above ground pool parts are not universal and can be difficult to identify. Inyo wants to make every effort  that your order meets your requirements. If you are not confident that you have chosen the right parts - Please send the following information that is requested below.  Inyo will forward to the information provided to the manufacturer to see if they can determine if the pool is one of their models.

Click here to submit the information requested below.

*   Size of the pool & approximate age of the pool?

*   Image of the pool wall.

*   Image of the upright

*   Image of the top rail connection to the upright.

*   Name & age of the pool (if known) 

Top

?     Asked on 4/9/2015by Michelle

Is there any way you can tell me the make and model of the pool these top caps go on? I am looking for the top rails that go with these top caps.
 Reply

A  Answered on 4/10/2015 by InyoPools Product Specialist Robert M.

Hello Michelle - This top cap may be used on several pools. So far we have found that this cap is used on the Voyager pool. If you scroll down to the bottom of the Top Cap Pewter Gray page, you can see the different associated schematics.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

After 15years the top caps were in bad shape

Written on 7/7/2021 by Guest

All you need is a screwdriver. very simple repair. parts were here in three days. good people to do business with.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Perfect match

Written on 6/18/2020 by Guest

These top caps fit exactly even though replaced by another number.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Pool top caps were old and weathered with some hooks broken

Written on 6/1/2020 by Guest

1. Used a cordless screwdriver to unscrew the top cap from the bottom support piece
2. Lifted the top cap off by unhooking the hooks from the pool edge
3. Added new top cap in place with hooks under inside pool edge
4. Lined up screw holes to bottom support and tightened with screwdriver
Replacement complete!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Wind Broke 4 of caps

Written on 5/31/2020 by Guest

Pretty simple.Two screws were needed to reattach the new ones. Its an old model and parts are almost impossible to find. I am glad INYO POOLS had them

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Broken holding tab on top cap

Written on 7/17/2019 by Guest

1. Loosen and remove 2 screws under top cap
2. Remove top cap by lifting loosened side towards inside of pool to release tab under top rail
3. Reverse previous instructions and insure when pushing screw side down to fit under support inside new top cap before tightening

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
6 Rating
5 star:
 
(6)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews