$15.51

Qty:

By Wilbar


Details

Top

Part # 1490520

Product Description

Ledge Cover - Lower J4000 (Single)

Save $$$ on a 10 Pack - Part Number 1490520-PACK10

Used With:

Above ground pool parts are not universal and can be difficult to identify. Inyo wants to make every effort  that your order meets your requirements. If you are not confident that you have chosen the right parts - Please send the following information that is requested below.  Inyo will forward to the information provided to the manufacturer to see if they can determine if the pool is one of their models.

Click here to submit the information requested below.

*   Size of the pool & approximate age of the pool?

*   Image of the pool wall.

*   Image of the upright

*   Image of the top rail connection to the upright.

*   Name & age of the pool (if known) 

Product Specifications

Commonly Used On:
Belize, J4000, Concorde
Top Cap:
1490546
Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

The top connector was chipped and falling off the frame

Written on 6/18/2020 by Guest

The top connector Is relatively easy to replace.

Remove the top cover and then remove the base plate (which only has 4 screws)

Then take the old top connector off by pulling toward yourself.

The new connector can be replaced in the same
Manner and then attaché they base plate by the four screws and replace the top cover.

Takes about 15 minutes in total to complete.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Rough winter caps broke off the pool which caused issues with the bottom support

Written on 7/8/2019 by Guest

Easy to fix my replacement parts are just like the original parts. Thank you so very much for your help I sent in two pictures and you guys guided me to the right replacement parts.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Needed new lower caps

Written on 5/28/2018 by Guest

An inyo specialist helped me identify the correct parts needed. They shipped quickly and installed perfectly with the top caps on our pool. All that's needed is a screw driver to screw the top caps to the bottom cap and then you clip the entire cap to the pool.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
3 Rating
5 star:
 
(3)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews



Top