$716.55
Part # PL2608
Warranty 12 Month Warranty
Maximize your savings with the new Pureline Prime Digital Dual Speed Pump.
The PureLine Prime Digital Dual Speed Pool Pump utilizes Century’s 2Green motor, delivering premium energy efficiency and program flexibility with an integrated user interface. The PureLine Prime Digital Dual Speed Pump is an exact replacement to the Hayward® Super Pump, making it quick and cost efficient to replace.
The main benefit of a dual speed pump is that you can run your pump at a high horsepower (HP) or a low HP. The majority of the time your pool is operating you will run your pump at the low HP which saves you 58% over the high HP. If you need to run your cleaner, spa or your pool is getting a bit dirty then simply switch over to the high HP for some serious cleaning. Another great benefit to the PureLine Prime Dual Speed Pump is that it is the only pump on the market which has digital controller mounted directly on the motor, this means easy installation and simple programming. For most dual speed pumps additional controllers with complex wiring are required which can be very expensive, that is not the case with the PureLine Prime Digital Dual Speed Pump.
PureLine Prime Pump Application:
PureLine Prime Variable Speed Pump Benefits:
Pump Curve
Disclaimer:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
Have you got a wiring diagram? the Hayward I had was wired with two yellow wires and a green ground. the new ones can be wired the same, don't need a white and black wire. Can yours? Also is it rated for 38000 sf pool size like the Hayward is?
Reply
Hi Joel, Here is the wiring diagram and here is the operational manual. The output of this pump would be comparable to the Hayward pump.
Reply
can you recommend an adapter to transfer 2 inch ports to 1.5 inch?
Reply
Travis you would require two of this 2" x 1.5" Reducer Bushing.
Reply
how many amps does this pump draw on each speed? 115/230. I can wire both ways.
Thanks!
Reply
Hi, Kevin. This pump uses 8.9 amps at 3450 RPM's and 3.1 amp at 1725 RPM's. This motor requires a 230 volt single phase power supply, cannot operate using 115 volts.
Reply