Have you got a wiring diagram? the Hayward I had was wired with two yellow wires and a green ground. the new ones can be wired the same, don't need a white and black wire. Can yours? Also is it rated for 38000 sf pool size like the Hayward is?
Reply
Hi Joel, Here is the wiring diagram and here is the operational manual. The output of this pump would be comparable to the Hayward pump.
Reply
can you recommend an adapter to transfer 2 inch ports to 1.5 inch?
Reply
Travis you would require two of this 2" x 1.5" Reducer Bushing.
Reply
how many amps does this pump draw on each speed? 115/230. I can wire both ways.
Thanks!
Reply
Hi, Kevin. This pump uses 8.9 amps at 3450 RPM's and 3.1 amp at 1725 RPM's. This motor requires a 230 volt single phase power supply, cannot operate using 115 volts.
Reply
I have a Hayward Super Pump with a Polaris pressure side booster pump. The old wiring was such that the booster couldn’t run without the pool pump being on (two switches daisey-chained together). How could this pump be wired with a booster pump to prevent accidentally operating the booster when the main pump onboard timer turns it off?
Reply
Hi, Brad. You will have to have the Booster Pump timer and the Prime Pump timer operate simultaneously when operating on a separate power source.
Reply