$51.75
By Pureline
Part # PL0773
Manufacturer Code 67304073000
Replacement Sand Filter Valve Upper Assembly w/ Spider Gasket used on Sand Filters By Blue Wave SandMan, Bridging China BT Series, Doheny's, Splash, Pooline & Reliant.
This Upper Valve Assembly with Spider Gasket is Commonly Used in the following Sand Filters....
This Upper Valve Assembly with Spider Gasket is Commonly Used in Sand Filters with the following Model #'s....
What spider gasket comes with the multi-port valve. Does it have 4 openings or 5? Thank you.
Reply
Hi, Tina. The Gasket is not sold as a separate part, however, it's a 4 spoke gasket as shown in the Valve Diverter w/ Spider Gasket - 47304003080.
Reply
Is there a chance my pool not wanting to prime good that this part is bad it is about 10 years old. If going bad how do you tell? We have put new gasket on the other basket and it primed up finally quick but now it seems if I press down on Hayward it seems to work better
Reply
Hello, The valve is on your pressure side so I don't think it will stop your pump from priming. Here is a guide about why a pump won't prime.
Reply
NEED TO KNOW THE SETTINGS ON HANDLE FOR A SIX PRORISTION HANDLE. MINES ARE WORN OFF
Reply
Hi David, Check out this Article on How to Backwash a Pool Filter when Your Valve has No Label this should help you out.
Reply
I NEED HELP FINDING A SAND FILTER SPIDER GASKET FOR A SP0714TX FILTER VALVE.
Reply
I have had the gasket replaced and the spring replaced and I still have water coming out of the backwash line when filter is on, do these assembly go bad as a whole, should I replace it to solve this nagging issue?
Reply
