?     Asked on 10/21/2017by Tina

What spider gasket comes with the multi-port valve. Does it have 4 openings or 5? Thank you.
 Reply

A  Answered on 10/23/2017 by InyoPools Product Specialist Lennox H.

Hi, Tina. The Gasket is not sold as a separate part, however, it's a 4 spoke gasket as shown in the Valve Diverter w/ Spider Gasket - 47304003080
 Reply


?     Asked on 5/20/2018by Inyo Visitor

Is there a chance my pool not wanting to prime good that this part is bad it is about 10 years old. If going bad how do you tell? We have put new gasket on the other basket and it primed up finally quick but now it seems if I press down on Hayward it seems to work better
 Reply

A  Answered on 5/20/2018 by InyoPools Product Specialist Alex V.

Hello, The valve is on your pressure side so I don't think it will stop your pump from priming. Here is a guide about why a pump won't prime.  
 Reply


?     Asked on 5/22/2018by DAVID L THRUSH

NEED TO KNOW THE SETTINGS ON HANDLE FOR A SIX PRORISTION HANDLE. MINES ARE WORN OFF
 Reply

A  Answered on 5/22/2018 by InyoPools Product Specialist Patrick P.

Hi David, Check out this Article on How to Backwash a Pool Filter when Your Valve has No Label this should help you out.
 Reply


?     Asked on 6/1/2018by jerry lark

I NEED HELP FINDING A SAND FILTER SPIDER GASKET FOR A SP0714TX FILTER VALVE.
 Reply

A  Answered on 6/1/2018 by InyoPools Product Specialist Lennox H.

Hi, Jerry. The gasket is not sold separately, you will have to replace the Key Stem Assy - SPX0714CA  or the Valve Top Assy - SPX0714BA.
 Reply


?     Asked on 6/7/2018by Inyo Visitor

I have had the gasket replaced and the spring replaced and I still have water coming out of the backwash line when filter is on, do these assembly go bad as a whole, should I replace it to solve this nagging issue?
 Reply

A  Answered on 6/12/2018 by InyoPools Product Specialist Lennox H.

Hi. Since the gasket and spring was replaced, I would recommend replacing the entire 6 Way Top Mount Filter Valve - PO11400V
 Reply


?     Asked on 6/19/2018by Inyo Visitor

What cycles does this have?
 Reply

A  Answered on 6/19/2018 by InyoPools Product Specialist Lennox H.

Hi. This Valve Top has the following positions, Filter, Waste, Closed, Backwash, Winter, Recirculate and Rinse. 
 Reply


?     Asked on 5/7/2019by Vasile Gocan

I have a valve on top of the sand barrel. I do not see a brand but 29-2599 is labeled on the top disk that has the marked up positions. will your valve fit my application?
 Reply

A  Answered on 5/14/2019 by InyoPools Product Specialist Michelle B.

Hello, Can you please send a picture of the filter tank?
 Reply


?     Asked on 5/15/2019by tim

will this fit a sf7011-01 my flange has 8 bolt pattern.not sure if i can eliminate 2 ?

 Reply

A  Answered on 5/20/2019 by InyoPools Product Specialist Lennox H.

Hi, Tim. Unfortunately, this Upper Assembly will not fit the SF7011-01 model system. We do not carry replacement parts for that system. 
 Reply


?     Asked on 5/15/2019by DAVID

WILL THIS VALVE FIT MY HAYWARD PRO SERIES S144T1540S
 Reply

A  Answered on 5/15/2019 by InyoPools Product Specialist Hector F.

We would actually need the model number of the valve itself in order to confirm any parts for it, but this part is not typically used with any Hayward filter. If you are not sure what model valve that you have you can always email pics of it to upload@inyopools.com so we can review and advise. 
 Reply


?     Asked on 6/1/2019by HELENE MT GLIDDEN

I just need the sticker. Where can I get it.
 Reply

A  Answered on 6/1/2019 by InyoPools Product Specialist Steve M.

Hi, Helene. Unfortunately, the sticker/decal is not available as a separate part. You will have the replace the Valve Cover - 47304005080 or this Valve Upper Assembly w/ Spider Gasket - 67304073000.
 Reply

  • Commented on 8/22/2019 by Product Owner

    I have seen these on Amazon.
     Reply


?     Asked on 6/1/2019by Bonnie

Can you order just an adhesive label to put on a haywood several years old
 Reply

A  Answered on 6/1/2019 by InyoPools Product Specialist Lennox H.

Hi, Bonnie. Hayward valve has it's own replacement decal. Please provide the valve model and or pictures of your existing valve so that we can locate the correct replacement.
 Reply


?     Asked on 6/2/2019by Inyo Visitor

will this fit a pentair sans dollar sd 40 pump?
 Reply

A  Answered on 6/8/2019 by InyoPools Product Specialist Michelle B.

Hello, This will be the correct valve you will need for your filter.http://www.inyopools.com/Products/07501352028152.htm
 Reply


?     Asked on 6/3/2019by Jacuzzi Laser 190 L

Will this fit my Jacuzzi Laser 190L sand filter?

 Reply

A  Answered on 6/6/2019 by InyoPools Product Specialist Patrick P.

This valve assembly does not fit the Jacuzzi 190L Sand filter. You will need this TM-12-JL7 Jacuzzi Laser Sand Filter Valve
 Reply


?     Asked on 6/7/2019by Inyo Visitor

The wording on my filter gasket is faded. Can the ring of words be replaced or is it necessary to replace the whole gasket?
 Reply

A  Answered on 6/7/2019 by InyoPools Product Specialist Patrick P.

Could you send us a few photos of your filter? A close of the label on the filter, a wide shot of the filter and a close up of the Valve label? To supply photos simply click the reply link below and upload your photos. Once we get any of this information we can make the proper recommendation.
 Reply

  • Commented on 6/7/2019 by Product Owner

    I added photos, please let me know if these help with the info you need. Everything is very faded. Thank you.

     Reply

    • Commented on 6/7/2019 by InyoPools Product Specialist Patrick P.

      Thanks for the photos those are quite helpful! You could purchase just this Valve Cover w/ Label the label is not sold separately so this would be the least expensive option to get the label.
       Reply


?     Asked on 6/14/2019by Inyo Visitor

will this fit a pentiar #145322 sd-60 sand filter/
 Reply

A  Answered on 6/14/2019 by InyoPools Product Specialist Lennox H.

Hi. It will not, you will need the Top Valve Assembly - 272531
 Reply


?     Asked on 6/15/2019by Gail Arnold

I have a sand filter with a model wc112-147 wc112-148 upper valve assembly. (what it says on it.) It is on a sta-rite sand filter body. Leaks everywhere. Approx 15 years old??? CAn I rebuild this unit or do I need to replace. I have not seen this same model number anywhere I have looked.
 Reply

A  Answered on 6/16/2019 by InyoPools Product Specialist Patrick P.

Hi Gail, You can use this Sta-Rite Upper Valve Assembly also here is a link to the Parts Breakdown for Your Sta-Rite Valve the item we suggest is Key 17
 Reply


?     Asked on 6/28/2019by Inyo Visitor

Will this fit my sta rite filter 14962

 Reply

A  Answered on 6/28/2019 by InyoPools Product Specialist Lennox H.

Hi. Unfortunately, it will not. There is not an assembly available for your model valve. Use our SwimQuip Multiport 1-1/2" 14962 Part Diagram to view the available replacement parts.
 Reply


?     Asked on 7/11/2019by John

This appears to fit a Porpoise PS160 filter. Can you confirm? The arrangement of the positions around the circle is identical. Also, I measured the distance between opposite screw holes (centers) which is 135 mm; between adjacent screw holes it's 67 mm.
 Reply

A  Answered on 7/17/2019 by InyoPools Product Specialist Lennox H.

Hi, John. Unfortunately, we're unable to locate any info to confirm if this part will fit a Porpoise PS160 filter. Please provide pictures of your filter so we can see what you have.
 Reply


?     Asked on 7/22/2019by Renae

Will this valves fit an Intex sand filter?
 Reply

A  Answered on 7/22/2019 by InyoPools Product Specialist Lennox H.

Hi, Renae. Unfortunately, this Valve Upper Assembly will not fit an Intex filter. 
 Reply


?     Asked on 8/4/2019by louis febbo

do you carry replacement upper valve assemblies for a jacuzzi sand filter # E-1408
 Reply

A  Answered on 8/7/2019 by InyoPools Product Specialist Lennox H.

Hi, Louis. I was unable to locate any info using the info provided. Please provide pictures of the valve and or filter.
 Reply


?     Asked on 11/2/2019by Randy frame

Will this fit my pooline s300 in place of old one and does it come with orings?

 Reply

A  Answered on 11/4/2019 by InyoPools Product Specialist Lennox H.

Hi, Randy. Yes, this will work as a replacement. The Cover O-ring - PL0765 is also included. 
 Reply


?     Asked on 4/7/2020by Scott

I need the part pictured but I am not sure this is the correct model for my filter. My filter is a Jacuzzi brand and it appears that the model number is DV ASSY 7-PCS. Just under the word "model" is the number 39263009. The handle is broken.
 Reply

A  Answered on 4/8/2020 by InyoPools Product Specialist Lennox H.

Hi, Scott. The DVK7 Complete Cover Kit - 39262605K is the correct part for your model valve. 
 Reply


?     Asked on 4/16/2020by Daniel

I have a Tidal Wave Roaring River which needs a new.....what this thing is. Do you believe it will work?

 Reply

A  Answered on 4/17/2020 by InyoPools Product Specialist Patrick P.

Hi Daniel, Yes this PL0773 is the proper valve diverter replacement for your Tidal Wave Roaring River Pool Sand Filter.
 Reply


?     Asked on 4/18/2020by moses rodriguez

i have a hayward sand filter now would this replacement work?
 Reply

A  Answered on 11/6/2020 by InyoPools Product Specialist Hector F.

Hi Moses, could you send us a few photos of the filter, its label, the multiport valve, and its label as well? To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
 Reply


?     Asked on 4/22/2020by mike

need a new valve sand filter sp715x62 var-- flo valve
 Reply

A  Answered on 4/23/2020 by InyoPools Product Specialist Hector F.

Your replacement complete valve would be the part number 4802-01F that you can view by clicking here
 Reply


?     Asked on 4/24/2020by David Bradshaw

I purchased a Dohenys sand filter back in 2016. I have a parts list and the filter number is 6592. The filter valve assy is number is 647304071.I was wondering if your filter would fit on this Dohenys filter?
 Reply

A  Answered on 4/24/2020 by InyoPools Product Specialist Patrick P.

Hi David, Yes this PL0773 Upper Handle assembly is used as a replacement handle assembly for the Doheny's 647304071 Valve. We have the PL0773 in stock ready to ship!
 Reply


?     Asked on 4/24/2020by i am looking for a top for a sand filter SPO714g11M

need one to replace old one
 Reply

A  Answered on 4/24/2020 by InyoPools Product Specialist Hector F.

The part number for the top valve assembly is part number 4703-20 that you can view by clicking here
 Reply


?     Asked on 4/25/2020by Joel Smith

Will this fit the Pentair 272531

 Reply

A  Answered on 4/25/2020 by InyoPools Product Specialist Patrick P.

Hi Joel, No this does not fit the Pentair Sand Filters. You will need this Pentair Upper Handle Assembly
 Reply


?     Asked on 5/2/2020by Inyo Visitor

Will this work on a dough boy above ground pool
 Reply

A  Answered on 12/10/2020 by InyoPools Product Specialist Hector F.

Hello, unfortunately, we do not carry Doughboy pool parts however could you send us a few photos of the filter and valve? To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
 Reply


?     Asked on 5/23/2020by joe joyce

I need to replace a model S201T vari-pro 7- position contol valve, would this work?
 Reply

A  Answered on 12/30/2020 by InyoPools Product Specialist Hector F.

Hi Joe, I believe that you are referring to the Hayward S210T model sand filter, which can use any of the multiport valves listed at key number 1 on this parts diagram
 Reply


?     Asked on 6/3/2020by Jim Rowland

will this fit an older model Tagelus model TA-60, that screws in from the top with screws?
 Reply

A  Answered on 12/2/2020 by InyoPools Product Specialist Hector F.

Hi Jim, can you please provide the model number of the top multiport valve or send us a few photos? One of the complete valve and another of the top of it looking down at it? To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
 Reply


?     Asked on 6/27/2020by Peyton

Would this fit a Hayward Variflow Valve SP0714G11 model? (not the newer SP0714G11M)
 Reply

A  Answered on 10/23/2020 by InyoPools Product Specialist Hector F.

Hi Peyton, actually the correct upper valve handle assembly for the Hayward Variflo model SP0714G11 multiport valve will be part number 4703-20.  
 Reply


?     Asked on 5/16/2021by Mike

I have a Blue Torrent D500 sand filter w/multi port valve. I can’t find part #s. Do you know if this will work as a replacement?

 Reply

A  Answered on 5/19/2021 by InyoPools Product Specialist Patrick P.

Hi Mike, Yes this is the proper replacement upper valve assembly for the Blue Torrent D500 sand filter
 Reply


?     Asked on 3/16/2023by Robert McConnell

Does this upper assembly fit a 647304071 multiort valve?
 Reply

A  Answered on 3/26/2023 by InyoPools Product Specialist Hector F.

Hello Robert, yes this top valve assembly is compatible with your valve model 647304071 . I have also emailed you an estimate attached to your account with us that you can convert to an order if you would like. Item is currently in stock and ready to ship. 
 Reply


?     Asked on 6/22/2023by Larry Walker

I have a Carvin 39263105 top of my filter. Do you have a replacement for this
 Reply

A  Answered on 6/27/2023 by InyoPools Product Specialist Hector F.

Hello Larry, yes this valve is a direct replacement for your Carvin/Jacuzzi alternate valve part number model 39263105. 
 Reply