?     Asked on 5/13/2013by Guest

Does the housing of his pump rotate easily?
 Reply

A  Answered on 5/13/2013 by InyoPools Product Specialist Patrick P.

Unfortunately, the housing on this pump does not rotate easily. The pump housing would have to be rotated by taking the pump apart. If this is a concern, I would recommend the Hayward Matrix pump.
 Reply


?     Asked on 7/26/2014by Guest

I have recently purchased this pump, i have an above ground pool that i purchased and it does not have a filter system does the pump have a filter or is it sufficient enough with the basket alone, this pool is an Intex 5,200 gallon pool 16' Round x 48" Tall.
 Reply

A  Answered on 7/26/2014 by InyoPools Product Specialist Patrick P.

You would definitely want to have a filter with this pump and I would suggest this Pool Filter here to be paired with this pump
 Reply


?     Asked on 2/15/2015by Nathan

What's the warranty on this pump, does it have a on/off switch?
 Reply

A  Answered on 2/16/2015 by InyoPools Product Specialist Andy O.

Nathan,The Warranty on the NE6171B is a 1 year Manufacturer's warranty, that  would be dealt with directly through the Manufacturer Bridging China.
 Reply


?     Asked on 11/23/2015by Charlie

Is there a utube on how to remove the motor to replace the bearings?
 Reply

A  Answered on 11/23/2015 by InyoPools Product Specialist Bob D.

Hi Charlie. We have two videos for replacing motor bearings on Youtube. Here's a ling to Part I and Part II.
 Reply


?     Asked on 5/28/2019by Trey

Yes I have two, I need to wire them up, it was wired for 230, can you show me the diagram for 120,. My helper disconnected all wires,. Really hope to you can help. Thank you!

 Reply

A  Answered on 5/28/2019 by InyoPools Product Specialist Lennox H.

Hi, Trey. There is a wiring diagram for 115 volts located on the motor label or you can use our PL1600 & PL1601 Wiring Instructions 115V & 230V Manual.  
 Reply


?     Asked on 6/13/2019by Joe pomilla

My mom has a maxi-pump. Model AC2000MXHT. I suspect the pump seal is leaking. I can't find the seal for this pump on your website. Another seal popped up on my search of your site but I'm not sure if this is right for her pump. Do you sell a seal for this pump?

 Reply

A  Answered on 10/14/2019 by InyoPools Product Specialist Steve M.

Joe, I apologize for the inconvenience, however, we do not have the seals for the model AC2000MXHT pump.
 Reply


A  Answered on 10/15/2019 by Industry Professional

5250-102 MFg code PS-201
 Reply


?     Asked on 5/7/2020by Dani Jo Wheeler

I have misplaced the drain plug and need to purchase a new one. Do you sell them? If not, what size do I need?
 Reply

A  Answered on 12/8/2020 by InyoPools Product Specialist Hector F.

Hi Dani, the drain plug part number for this Maxi pool pump is PO12728DP
 Reply