Our inground pool has a Jacuzzi sand filter (Model #DV Assy 7-Pos 1 1/2NPT)(Order #39263009) which is dated 2000.
I have a very small leak coming from the 7 position handle. No other leaks around the piping, of where the bolts attach to the head and tank.
Do you recommend a complete gasket rebuild kit to fix the leak? Do you carry?
Or do you recommend a complete head ass'y replacement. Do this unit that you carry replace my older Jacuzzi 39-2630-09 head?
Reply
I would suggest the complete cover kit here for the Jacuzzi 7 way valve http://www.inyopools.com/Products/07501352015807.htm as there are so many parts within in the top half of the valve which could be causing your leak. You may view the cover kit (Key D) as well as all the other parts of your valve here http://www.inyopools.com/pool_parts_7_way_dial.aspx
Reply
I have a Jacuzzi sand filter head (7 position) 1 1/2 in. number 39263009.... I want to replace entire head. I believe it's a 2002 mfg. date. Do you have in stock and/or what is replacement number? Bolt on not clamp on.
Reply
Hi Dennis, This would be the correct complete replacement valve and we do have these readily available.
Reply
I have a Dial Valve Jacuzzi DV ASSY 7-POS 1-1/2 NPT, 39263009, I need to know which part replase it, in your page i found a part 39262803, it looks like mine. I'll be grateful your help. I'm writing from Costa Rica, thanks.
Reply
Hi Maynor this would be the correct replacement for the Jacuzzi 39263009 valve.
Reply
Is "drain" the same as "waste"? If I only have a leak to my back wash port can I just change the spider gasket? Thank you
Reply
Hi Lindsay, If you have a leak coming out of your waste port then most likely this is a bad spider gasket or spring. We would suggest the DVK7 Repair Kit which includes both of these parts.
Reply
What position does the handle need to be on for "waste" there is not a clear "waste" position... I would like to bypass the filter when vacuuming but not sure which position the handle needs to be in for waste
Reply
Hi Anthony, The "Waste" position is located at 11O'clock from "Filter" mode being 12.
Reply
I have a jacuzzi Dv- 7-POS
ORDER NUMBER 39263009
Serial number 006961
I need a complete cover kit. Do you have that in stock?
Reply
Hi Karen, you would need this 39262605RKIT Jacuzzi 7 Position Cover Kit which we do have in stock ready to ship.
Reply
valve one year old cant get the handle to move positions
Reply
Hi Mark, I would recommend the Diverter Repair Kit DV6/7 (39251509RKIT) to resolve your issue or take the valve apart to see if sand or debris is caught up in the diverter.
Reply
Jacuzzi Sand filter -Model DV 7 POS. The backwash hose leaks slowly when pump is off and quite a bit when pump is running. I'm assuming I need a new gasket, but I'm not sure. Any idea what part I need to correct this? Thank you.
Reply
Hi Bobby, You can get the Diverter Repair Kit DV6/7 (39251509RKIT) or replace the entire valve to resolve your leaking valve.
Reply
I am trying to decide whether to replace the broken 7 way valve (6 years old) or replace the entire (jacuzzi laser 225L) filter system (according to the label on the filter it is 14 years old) but I can't seem to find any information on the life expectancy of a sand filter system.
Reply
Good morning Kian, This is completely up to you. There is no way to tell how long it will last but the material that they are constructed from is built to last and depending on the elements and environment they are placed in determines how long. Here is a link for all the parts and the entire unit. Jacuzzi Laser Sand Filter Parts.
Reply
Is this a direct replacement for 39263105?
Reply
Hi, John. The DVK-7C Clamp Style Valve - 39263020K is the correct replacement for the 39263105 valve.
Reply
Will this work for a jacuzzi filter model is 39263105 DV Assy 7-Pos 1-1/2 V-Flng Tri
Reply
Hi, John. The DVK-7C Clamp Style Valve - 39263020K is the correct replacement for P/N 39263105.
Reply
Hello. I am looking to replace my filter valve and this looks to be what I need except ours is a screw on and not a bolt on. Is that available??
Reply
Hi, Donni. Unfortunately, we will need the model of your filter in order to locate the valve that you need.
Reply
I am trying to find a replacement valve for my Jacuzzi laser sand filter model 250L numbers on valve or not visible What would you recommend
Reply
will this fit my in ground pool it needs a new valve it is 1.5 in ?
Reply
If the valve will work will depend on the model of the filter that you have. Please call in with the filter model so we can cross reference that. If you do not know the model of the filter then you can send us some images through our support request page.
Reply
I have a 200 pound Jacuzzi sand filter the diverter model is 39263100 DV assy 7 pos 1-1/2 Npt Tri Will the one that pops up slightly different model work it looks likeit I will call Monday to order. Thanks Owen
PS How long to arrive by ground shipping 14057 Zip Code
Reply
Hi Owen, Thanks for the order! How did everything work out with your valve? This valve should work for your 39263100 valve. Normal delivery time is 3-5 business days.
Reply
Is this a kit to rebuild or a complete valve? I have a DV-ASSY 7-POS 1-1/2 V-FL, 39263030. Will this part (39262803) work?
Reply
Hi Duane, Yes this would be to replace a complete valve and is the proper valve for you.
Reply
what filter model does this fit? i need to purchase assembly also but do not know which one
Reply
Most commonly this valve is used on the Jacuzzi Laser Sand Filter.
Reply
Just received my order of 39262803R DV DVK-7 Dial valve kit . I think the hardware kit that was included skew # 42372110 6 bolts , 1pressurer gauge , 1 O-RING is not correct. I was not able to use O-RING , to larger of a diameter . Can we correct this problem with the right O-RING ? Thanx LEO
Reply
Leo, The gasket that comes in the kit goes in between the valve and the flange adapter. There is another gasket that goes underneath the flange adapter.
Reply
Does the replacement kit come with the filter basket at the bottom of it?
Reply
Hi, Beverly. The Basket Assy - 88158001R is not included with the valve.
Reply
What backwash adapter is compatible with this?
Reply
Lindsay, The backwash port can be plumbed many ways. The most common way is the use a male threaded hose adapter.
Reply
You have the DVK 7 valve kit with the number 39262803. I need a replacement kit with the number 39263100. Do you have it?
Reply
Hi, Alan. This DVK-7 Dial Valve Kit - 39262803 can be used as a replacement for model # 39263100.
Reply
I need a gasket for a model 39263009 and I cant find one on here , Just the whole valve ... I Only need the gasket thanks
Reply
Hi, Patrick. The Diverter Gasket is not sold as a separate part, you will have to replace the Diverter Repair Kit DV6/7 - 39251509RKIT or the Key Assembly w/ Gasket - 39068705R.
Reply
I need to replace my 7-POS DV AS 5-POS REPLACEMENT valve. The Model number is 39000302. It is allowing leakage to the waste run that is impacting water volume in the pool. Please advise
Reply
Hi, Harry. This Dvk-7 Dial Valve Kit (39262803) can be used as a replacement for model # 39000302.
Reply
I am looking for a replacement for 39-2630-20-R 7-Position Dial Valve w/O-Ring. Will this work?
Reply
Hello,
I bought this valve 3 years ago. Works great. The only issue I have is the position sticker / pictures on the top of the valve have faded and pealed off. As I result I can no longer tell what position to put in for waste, backwash, drain, etc. I found one manual on line but it does not show the positions. Is there a manual or top view picture that can help show the positions for the valve. Thank you. -Steve
Reply
Hi. My valve seems to be leaking on the very top possibly around the handle. Is there a gasket repair kit to fix this?
Reply
Some of these valves do have repair kits but not all. The first step would be to confirm the model of that valve so we can cross-reference that. If you cannot locate that then you can always email us images of it to upload@inyopools.com so we can try and identify it for you.
Reply
In the process of ordering this to replace my current DVK-7 Valve. Do you have a union hose replacement that will go with this as well? Thanks, Jason.
Reply
Hi Jason, Here is a link to our Jacuzzi Union Hose Replacements.
Reply
Will this part fit model 190L-S15LR25-FTWP?
I've attached the photo of the part and the model number.
Here is a break down of your filter. http://www.inyopools.com/pool_parts_jacuzzi_laser_sand_filter.aspxCan you please send a side picture of the multiport valve?
Reply
We have a sparco sand filter with a 7 position multiport valve. The number on the filter is 808-0043-sp(r) Will this replace it?
Reply
The valve has no waste setting. It has test, drain, filter,rinse, whirlpool and backwash. What setting should I use to vacuum heavy debris from pool without running through the filter?
Reply
You would want to use the drain setting on this valve to vacuum to discharge.
Reply
have a jacuzzi 7 pos valve. Model #39263009. assy 7-pos 1-1/2npt. Which valve would I need to replace the one I have. Ed
Reply
Hello, you will need part number 26-105-1018.
Reply
I have a Jandy sand filter , valve # 39263105. Was wondering if this valve will work it looks exactly the same.
Thanks,
Brendan
Reply
i need an overhead view of the valve so that i can see where the backwash position is located. the sun has erased everything
Reply
Hi. Images can be seen via the DVK-7 Cover - 39262605R000 images.
Reply
Hello.
1) Is this part a right replacement for my Multi-port valve:
JACUZZI DV ASSY 7-POS 1-1/2NPT
Model 39263009
Date 22Jun01
LITTLE ROCK, AR USAJACUZZI DV ASSY 7-POS 1-1/2NPT
Model 39263009
Date 22Jun01
LITTLE ROCK, AR USA
Pictures enclosed.
2) Also what is the difference between parts Part # 39262803R and this one.
Thank you in advance.
Regards
AnK
Hi Andrew, This DVK-7 Dial Valve Kit - 39262803R is the correct current replacement. I beleive we may this item listed twice on the website if order the 26-105-1018 or the 39262803R you will recieve a 39262803R valve.
Reply
Is there a overhaul o-ring /seal kit?
Reply
Please click here to view the seals and kits for this Jacuzzi 7 Way Dial multiport valve.
Reply
I have the jacuzzi filter shown in the image. I have dirty water returning to the pool when vacuuming to waste. Is it possible to replace the multiport valve with water in the pump?
I have a valve model 39263009
Is ithat model still available for purchasing or I need to buy another model now?
My valve need replacement of inside gaskets because water comes into pool when doing backwashing.
I live in Ecuador so need to import parts since there isn´t any local supplier.
Reply
Hello Mario, Yes, the DVK-7 Valve, Bolt Type - 39262803R is available. Please email us a upload@inyopools.com to request a quote to ship internationally or to an export company.
Reply
my part number is 39263105 DV Assy 7-Pos 1-1/2....will this part work for me?
Reply
My Jacuzzi #39263009 has the backwash outlet on the opposite side of what your part shows. Does that make a difference?
Reply
Hi Frank, This valve will replace your old valve and attach to your filter, however since the port locations are in a different location you may have some slight re-plumbing. This valve is the only replacement for a Jacuzzi #39263009.
Reply
I need a replacement bolt on multi position valve for my 2000 Jacuzzi Laser 225L sand filter as mine now leaks.
Currently the multi valve on the filter is a Competition brand with the following stamped on it - model: DV ASSY 7-POS 1-1/2NPT TR and order number: 39263100.
It appears your Jacuzzi DVK-7 Valve, Bolt On, 7 Position - 39262803R (PART # 26-105-1018 ) is an identical replacement. Is that correct? thank-you
Yes, this is the correct replacement for your 7-position bolt-on style valve for your Jacuzzi Laser 225L.
Reply
HI I HAVE ONE OF THESE VALVES AND I CAN'T READ THE POSITIONS ON THE TOP OF THE VALVE IS THERE A WAY TO GET A STICKER OR SOME WAY TO SEE WHAT POSITION DOES WHAT THANKS JIM
Reply
The valve label is not sold separately. Here is an image of the top. You should be able to match up the positions.