?     Asked on 1/24/2013by Guest

Our vacuum hose for our in-ground pool is fine, but the plastic ends have deteriorated. Is there a replacement for the plastic fittings?
 Reply

A  Answered on 1/24/2013 by InyoPools Product Specialist Patrick P.

Yes,there is. If you have 1.5" vac hose you can use the 3103-0. If you have 1.25" vac hose, you can use the 3103A.
 Reply


?     Asked on 5/8/2015by Inyo Visitor

Will this hose work with a kreepy krawly ?
 Reply

A  Answered on 5/9/2015 by InyoPools Product Specialist Patrick P.

No this would not work with a Kreepy Krauly or an other automatic pool cleaner. This hose is use for a manual vac head you attach to the end of your telescopic pole. We do carry Kreepy Krauly Hose here.
 Reply


?     Asked on 5/22/2015by Dottie

My inground pool is 40 ft long What length vacuum hose do I need
 Reply

A  Answered on 5/22/2015 by InyoPools Product Specialist Joe S.

Hi Dottie, I would recommend going with the NA225 this will ensure you have enough to do the complete pool and walls at the farest end of the pool from the skimmer
 Reply


?     Asked on 7/27/2015by Maryann

Is this hose compatible with Zodiac? Does this hose 'float?" Thanks.
 Reply

A  Answered on 7/27/2015 by InyoPools Product Specialist Hector F.

No, these hoses are designed for manual vacuums only. We would need to know which specific Zodiac cleaner that you have to accurately cross reference the hoses you need.
 Reply


?     Asked on 6/9/2018by Al Katzenberger

hello, I have a 38'-0" above ground pool. what size vacuum hose should I get for the pool the pool is 7'-6" deep at the deep end. NA215 Thank you, Al
 Reply

A  Answered on 6/10/2018 by InyoPools Product Specialist Lennox H.

Hi, Al. To determine what size vac hose you will need, measure the length from your vacuum line to the furthest end of the pool then add 6 feet . 
 Reply


?     Asked on 8/8/2019by Inyo Visitor

when I take my skimmer basket out to connect vacuum hose , I have two holes , what do I do ?
 Reply

A  Answered on 8/9/2019 by Industry Professional

When your pump is running you should be able to determine which hole is getting suction. That is the one to put the vac hose in
 Reply