?     Asked on 12/29/2011by Guest

How do you know if a pool heater is a propane heater or a natural gas heater?
 Reply

A  Answered on 12/29/2011 by InyoPools Product Specialist Patrick P.

Typically in the product name we use the abbreviation of "LP" for propane or "NG" for natural gas. Click here for a full listing of our >Pool Heaters.
 Reply


?     Asked on 1/16/2012by Guest

Will a gas heater operate at the low speed of a dual speed motor?
 Reply

A  Answered on 1/16/2012 by InyoPools Product Specialist Patrick P.

Probably not - Most gas heater will shut off at low GPM levels (20-40) to keep the heater cores from overheating - 20 for 200 BTUs, 40 for 400 BTUs. Depending on your pool system you might get these GPM levels at the low speed but generally these heaters must be run at the motor's high speed.
 Reply


?     Asked on 8/20/2012by Guest

Is this Hayward heater good for an indoor application for a commercial spa 5' X 8' X 4' deep and is it adaptable with a power vent?
 Reply

A  Answered on 8/20/2012 by InyoPools Product Specialist Patrick P.

Do you know if your local code requires that the heater be ASME certified as some commercial code does require this certification and this heater is not ASME certified. If you do not require the ASME certification than yes this would be a great heater for you. Based on your dimensions your spa is roughly 1200 gallons and this heater will take 140 minutes to raise the body of water 30 degrees. We do sell a Hayward indoor vent which you may view at the bottom of this page (DH150). If you require an ASME heater than I would suggest the Raypak 206K ASME heater along with indoor draft hood.
 Reply


?     Asked on 10/18/2012by Guest

What is the elevation rating for the Hayward H-Series Low Nox Heaters
 Reply

A  Answered on 10/18/2012 by InyoPools Product Specialist Patrick P.

Per Hayward, the Hayward H-Series Low Nox Heaters have an elevation rating up to 7,700'
 Reply


?     Asked on 10/8/2013by Guest

Where can my heater be installed?
 Reply

A  Answered on 10/8/2013 by InyoPools Product Specialist Patrick P.

There are specific venting requirements and clearance distances that must be met to ensure proper operation. Consult the owner’s manual for exact specifications for your model of heater.NOTE: Gas fired heaters should be diagnosed and repaired by trained personnel.
 Reply


?     Asked on 6/8/2015by Inyo Visitor

Is it possible to convert the h150 to propane?
 Reply

A  Answered on 6/8/2015 by InyoPools Product Specialist Patrick P.

Yes we do carry a Hayward H Series Heater Conversion Kit Natural Gas to Propane here.
 Reply


?     Asked on 7/10/2015by dale mcintyre

Can you go from natural gas to lp gas mine is now lp gas and I now need natural gas.
 Reply

A  Answered on 7/11/2015 by InyoPools Product Specialist Patrick P.

Yes you can convert a Hayward heater from natural gas to LP or vice versa. We may view the Hayward Heater Conversion Kits here.
 Reply


?     Asked on 2/6/2016by Mitchell

what year was the h1501 model made?
 Reply

A  Answered on 2/8/2016 by InyoPools Product Specialist Lennox H.

Hi Mitchell, These unit was being manufactured in the mid '80 to early '00. To find out what year your unit was manufactured you will have to call Hayward Pool Products with the serial number of your unit. Haywars=d can be reached toll free at 888.429.9273.
 Reply


?     Asked on 8/7/2016by Linda

What does it mean when H5 comes up on your heater
 Reply

A  Answered on 8/8/2016 by InyoPools Product Specialist Lennox H.

Hi Linda, The error code "HS" appears when the water temperature is reading above 105 degrees. If that's not the case then the temperature sensor will have to be replaced.
 Reply


?     Asked on 6/7/2021by Ed

Where can I find a parts list for the H1501?
 Reply

A  Answered on 6/7/2021 by InyoPools Product Specialist Patrick P.

Hi, Please click here for the H1501 Hayward Heater Parts Diagram
 Reply