?     Asked on 1/31/2012by Guest

I need parts for my filter valve. When I look at the filter parts breakdown, it gives me different choices. How do I know which one is the one I need?
 Reply

A  Answered on 1/31/2012 by InyoPools Product Specialist Patrick P.

In order to locate the correct parts we will need to know the model number of the filter valve. Two identical filters can have two different valves. Typically the valve model will be located on the label of the valve. If there is no model number on the valve, you can try to see if there are any part numbers on the valve itself. Once you've located you valve model you can check out our >Filter Valve Parts.
 Reply


?     Asked on 6/1/2015by Vicki

I'm looking for a replacement part for my Hayward s240 filter. The part I need is multiportvalue value it is 2 inch
 Reply

A  Answered on 6/1/2015 by InyoPools Product Specialist Andy O.

Vicki- The recommended multiport valve for the S240 would be the SP0715X32.
 Reply


?     Asked on 7/7/2015by Robert Fernandez

Will this side mount valve fit my 2" leaky valve? I have a Pentair part number 140243 sand filter for my in ground pool.? Valve model # is SM-20-3
 Reply

A  Answered on 7/8/2015 by InyoPools Product Specialist Hector F.

Negative. This is a Pentair model filter hence it needing their design valves. On your filter's parts diagram here on key 39 are the listed valves that are compatible with your filter.
 Reply


?     Asked on 7/21/2015by Inyo Visitor

I have a Hayward valve model number sp71032. What is the replacement valve model number?
 Reply

A  Answered on 7/21/2015 by InyoPools Product Specialist Robert M.

Part number SPX0710X32 (4800-25) is the correct replacement valve for the SP71032.
 Reply


?     Asked on 6/6/2016by Nigel

Hello, Do you sell the sight glass only
 Reply

A  Answered on 6/6/2016 by InyoPools Product Specialist Patrick P.

Hi Nigel, yes the SPX0710MA is the Sight Glass Only for this valve.
 Reply


?     Asked on 5/7/2017by Corey

Will this work on an S244S?
 Reply

A  Answered on 5/8/2017 by InyoPools Product Specialist Patrick P.

Hi Corey, Yes the SP0715X62 Valve is the correct valve to be used on the Hayward S244S Side Mount Sand Filter.
 Reply


?     Asked on 6/17/2017by Inyo Visitor

will this part replace a sp710xa-13
 Reply

A  Answered on 6/18/2017 by InyoPools Product Specialist Lennox H.

Hi. The SP0710X62 valve is the correct replacement for SP710XA-13.
 Reply


?     Asked on 4/14/2018by steve potter

WILL THE #SP0715X62 WORK ON THE S360SX?
 Reply

A  Answered on 4/17/2018 by InyoPools Product Specialist Lennox H.

Hi, Steve. Yes, this Side Mount 2" Valve for Sand - SP0715X62 will work on the S360SX model. 
 Reply


?     Asked on 6/30/2019by Matt

This valve assembly is listed on the website for 2 different prices. What's the difference. I see no described difference in the details tab.

 Reply

A  Answered on 7/17/2019 by InyoPools Product Specialist Hector F.

This has a duplicate listing on our site which will likely be corrected shortly so if you can still order it then the cheaper one would be a better deal. 
 Reply


?     Asked on 12/27/2019by Did

Is this valve compatible with Hayward 244S model sand filter tank?
 Reply

A  Answered on 12/30/2019 by InyoPools Product Specialist Lennox H.

Hi, Did. Yes, this SP0715X62 valve is compatible with the S244S model filters. 
 Reply


?     Asked on 5/26/2020by Ozkan Celiktras

Is this valve compatible with DE4820?
 Reply

A  Answered on 5/26/2020 by InyoPools Product Specialist Patrick P.

No this valve does not work on the DE4820. You will need this valve here SP0175XR50 2" DE Valve
 Reply


?     Asked on 5/30/2020by Dan Baden

Does the gasket for the SP0715 X62 require gluing into place?
 Reply

A  Answered on 5/30/2020 by InyoPools Product Specialist Hector F.

It is recommended to use either Loctite or clear RTV silicone which you can view by clicking here
 Reply


?     Asked on 5/6/2021by Nathan Richins

Will the SP0715X62 Valve work with theHayward W3S310S sand filter?
 Reply

A  Answered on 5/6/2021 by InyoPools Product Specialist Patrick P.

Hi Nathan, Yes this is the correct valve for the Hayward S310S sand filter.
 Reply