I have a pentair 460930 the LCD panel is not indicating the pool temp. Actually not indicating anything could it be a fuse or does it need servicing. It's a little over 2yrs old. Thanks.
Reply
Nick, It is possibly a fuse or the control panel itself. Pentair will be able to assist you in trouble shooting. You can reach them at 800-831-7133.
Reply
We have a 14,000 gal above groung with surrounding deck....will these pumps work , or are they for inground only
Reply
What are the dimensions for the Pentiar, Model 70, 75,000BTU electric heat pump...length, width & height
Reply
What are the shipping dimensions for the Pentair Model 70 75,000 heat pump
Reply
I have a pour-over spa with my pool that is able, by valving, to be self-contained. My current heater has developed a pressure leak, so I have to replace it. My spa is 400 gallons and is circular - 5' in diameter and averages 2 feet deep. Can this Ultratemp 70 be used to heat only the spa to 95 degrees when the water temperature prior to heating is about 70 degrees? I live in central Florida.
Reply
This unit could heat the Spa or the pool at the temperatures you want but they would have to be done individually. Meaning Just circulate the spa to heat buy itself, or the pool by itself.
Reply