?     Asked on 9/14/2012by Guest

What is the micron rating for a Unicel element?
 Reply

A  Answered on 9/14/2012 by InyoPools Product Specialist Patrick P.

All Unicel elements & grids have a 20 Micron Rating.
 Reply


?     Asked on 9/16/2015by porfirio martinez

if this catridge feet in my purex triton clean &clear plus cc320p
 Reply

A  Answered on 9/17/2015 by InyoPools Product Specialist Andy O.

Porfirio, The Clean & Clear Plus 80 Generic Cart. (PCC80) part #NFC1976 will fit you cc320p.
 Reply


?     Asked on 6/25/2016by Alan

Will this fit the Pentair R211084K canister. I am using the canister in a filter system. If it doesn't fit that one, what filter cartridge will? Thanks
 Reply

A  Answered on 7/2/2016 by InyoPools Product Specialist Lennox H.

Hi Alan, This PL0119 cartridge will not fit the Pentair R211084K canister, you will need the 25 Sq.ft. Cartridge, w/ Plug (R172653).
 Reply


?     Asked on 11/26/2016by Charlie

This filter looks to be the correct size, but want to make sure it will replace my current filter. Numbers on the filter are P/N 178580/R173873.
 Reply

A  Answered on 11/28/2016 by InyoPools Product Specialist Andy O.

Hello Charlie- The Clean & Clear Plus 80 Generic Cart. (PCC80) - PL0119 is the correct generic replacement cartridge for your Filter.
 Reply


?     Asked on 1/8/2017by Linda

My filter is P/N 188592 I would like to know if this is the correct replacement for the current filters. There are 4..Thanks
 Reply

A  Answered on 1/8/2017 by InyoPools Product Specialist Patrick P.

Hi Linda, The Pentair 188592 is the Quad 60 DE Filter and which does not use the cartridges listed on this page. Your filter uses the Quad 60 Replacement Grids
 Reply


?     Asked on 3/19/2017by Jeff

Will this cartridge take the place of Pentair P/N 178585 or R173578. Thanks
 Reply

A  Answered on 3/19/2017 by InyoPools Product Specialist Patrick P.

Hi Jeff, The 178585 and R173578 are used on the Pentair Clean and Clear Plus 520 so you will need the PL0121 Clean & Clear Plus 520 Replacement Cartridge.
 Reply


?     Asked on 3/22/2017by bob

I clean my pool filters with a pressure washer at an 45 degree angle at low pressure. Works extremely well but a lot of white water comes out during the process . Is this the filter coming apart ? And or the white water is from debris . Looking for advice.
 Reply

A  Answered on 3/22/2017 by InyoPools Product Specialist Andy O.

Hello Bob- Yes, that is the cartridge being damaged and coming apart. I wouldn't use a pressure washer even at low pressure.
 Reply


?     Asked on 5/11/2017by ed

I have a Pentair clean & clear plus CCp320 what is the best filter replacement
 Reply

A  Answered on 5/11/2017 by InyoPools Product Specialist Hector F.

I would recommend the original Pentair elements being the part number 4900-312. You would need four of them.
 Reply


?     Asked on 6/18/2017by leighton

I have a Pentair that requires 4 cartridge - 20" tall 7" dia and hole opening 3". the fliter unit is not marked so i do not have a unit number to identify what system i have. this is the first cartridge i found with same size - question if they do not fit can i return them? I will not get them wet - simply place inside to check. Second question - i am looking for a cleaning hose to fit the intake hole - male end one and one half inch. female end can be pluged by 1 1/2 inch male
 Reply

A  Answered on 6/20/2017 by InyoPools Product Specialist Patrick P.

Yes you can return these within 30 days as long as they are in new and unused condition. I'm sorry we don't carry the hose that you described.
 Reply


?     Asked on 7/15/2019by Paul Taylor

Will this pcc80 fit in my ccp320?
 Reply

A  Answered on 7/15/2019 by InyoPools Product Specialist Hector F.

Yes, this would the correct replacement cartridge for your model ccp320 filter. 
 Reply