The heater turns the thermostat to high the longer it runs?
Reply
The tech at Little Giant wanted me to ask a few questions : The first would be how old the heater is? He said the older it is the points would stay closed in the thermostat the water would just keep getting warmer. If the points were open, it would never get hot. A new thermostat would be part number 9523-11. According to the tech, and depending on the age of your heater, a new one may be the best bet. That part number 9521-0
Reply
What is the center line measurement between the inlet and outlet?
Reply
The centerline measurement between the inlet and outlet port measures 23" you may also see Detailed Dimensions of This Baptistry Heater here.
Reply
I have a Little Giant hot water, how can I tell if it is heating the water and how long should it take to heat the water in a 500 gal. baptistery?
Thanks
Reply
ccording to spec this unit "heats 100 gallons per hour - 30° Rise".
Reply
Just installed new 6kw heater and would like to know if light on thermostat is supposed to be on when in operation?
Reply
Hi, Charles. The indicator light will be on until the water reaches the set temperature.
Reply
my church has a little giant le model number 6hhl the heater was left on after the pool was drained. does your company offer heating elements for sale and would that be all that is needed or do i have to replace whole heater.
Reply
Hi, Phil. We do offer replacement parts for that unit, click this link > Complete Baptistry Heaters and Replacement Parts.
Reply
Are these units supposed to be stood up as all illustrations show or can it be laid down on its side and still function properly?
Reply
Hi, Don. These units must be installed vertically per the manufacturer's installation requirements.
Reply
How long can this unit stay in the "on" heat position. It will be on a 800 gl. Baptistery and wanting about 100 to 105 degrees. Ambient temp is about 70 degrees.
Reply
Hi. If the water temp is also 70 degrees, it will approximately 10.3 hours to achieve the desired temperature increase.
Reply
I need a wiring diagram for the 240 volt system wires in side the box where the heating element hooks up
Reply
Hi. Use this 3kW & 6kW Wiring Diagram as a reference.
Reply
I have the 6kw Baptistry heater with the water level sensor is there a wire diagram available to look at
Reply
Hi. The 3kW & 6kW Wiring Diagram is all that is available.
Reply
Our Little Giant heater has served us well. I turn it on Saturday nights for Sunday morning. I had a baptism this past Sunday and the water was very cold. Heater and pump were not working. I checked it today and when I press the reset button on top and then turn on heater and pump, the red light comes on and everything works for about 30 seconds and then the light goes off and everything shuts down. What do I need to replace?
Reply
Unfortunately, we do not have the resources to provide troubleshooting for this heater. Please contact Little Giant Manufacturers directly at https://little-giant.com/product/11-5kw-water-heating-circulation-system/
Reply
