I have these existing Pentair Aqualights 77168100. Is there an LED light replacement that will fit the niche?
Reply
Hi Chris, The Intellibrite 5g 120v 50' Color LED Spa Light (640121) will replace your Pentair Aqualight 77168100 and fit into your existing niche.
Reply
I have this fixture I need a bulb replacement
It says bulb type t4 250 watts and 120 volts it has two thin pins on bottom
what bulb do I need
Reply
Hi Frank, The Bulb, Quartz - 120v 250w-twist (JD250DC/120) will be the bulb needed based on the description provided. It is recommended that you also replace the AquaLight Silicone Gasket (79108600).
Reply
What is the snap on color lens cover kit 6pack? part number for this Pentair light77168100 thanks
Reply
Hi Jay, The kit you're referring to is the Spa Brite/Aqua Light Lens Cover Set (650019).
Reply
We currently has the 77168100 Pentair Water pool and spa light. We are in need to a replacement gasket for that light and the wire clamp bolt. Where can we get those items?
Reply
Hi Jack, you would require this Pentair AquaLight O-ring and this Pentair AquaLight Wire Clamp.
Reply
My light looks like this one but the overall dimensions are: face diameter 6", depth 4.5" (from back side to front of lens. It is 20 years old and finally needs replaced. The label says: Series 77XXXX, Watts 250, Volts 120, Bulb type T-4. What is the right replacement light fixture for me?
Reply
Hi, Dale. The AquaLight series fixture is the correct replacement.
Reply
I believe this is the light I am needing, but the cord is much longer than what I need. My light says Series 77XXXXXX, 250 watts, 120 volts, T-4 bulb type, use with models 7824XXXX & 792066XX fixture housing. OD is 5 3/4"; ID is 3 1/4" I only need about a 3 foot cord. Which light do I need, and what are the cord options? Thank you!
Reply
I have an existing Pentair 77168100 250Watt spa light. I have replaced the fixture several times. Is there an LED fixture that would fit in the same recessed housing currently installed for the 77168100?
Reply
What is a LED option with white light only to replace this older light?
Reply
I have a pentair 77168100 i need to replace the bulb, do you have a led option in white or color? Thanks
Reply
Unfortunately, your light model does not have an LED bulb replacement option so you would need to replace the entire fixture with either one of the Pentair Intellibrite models or a standard Spabrite then use an LED bulb in that model.
Reply
Do you have an LED light that will replace this old light? 250W 120V?
Thank you
Hello John. According to the picture of the light fixture you provided, the following Pentair light fixture should fit your niche, IntelliBrite 5G 120V 100' Color LED Light - EC640122. Please note this fixture comes with a 100 ft cord length.
Reply
