Does this cuff on placed on hose allow the cuff be mounted on hose & then allow the hose end be inserted to vacuum port ?
Reply
The replacement cuff is attached to the end of the vacuum hose. You would need to cut off the off, broken cuff. The new cuff screws on to the hose. You would then be able to use your vacuum hose and connect it to the vacuum port.
Reply
do you have 1 1/4 cuff hose
Reply
Hello, I apologize, but the lowest we have is 1.50" hose cuff.
Reply
I need a "Male" 1.5 inch Hose Cuff. Does not need to be a Swivel Type. "Female" Cuffs, including Swivel Types, have been great.
Reply
We no longer stock the 1.5" hose mender, but I was unable to find a male hose cuff. I did find a Hose Adapter, 2"mipx1 1/2"hose Male Red. (spx1082z3). I hope this is more along the lines of what you are looking for.
Reply
I have a hayward W560 leaf canister. My vacuum hoses are 1 1/2". To get the canister inline I need an adapter for the male end of the hose to the male port of the canister. I also need an adapter for the female end of a hose to the female end of the canister.
Reply
Hi, Joe. The Hayward W560 Canister has two male ends that will connect to the female wend of this Hose Cuff. This Hose cuff will connect to a 1-1/2" pool vac hose.
Reply