?     Asked on 4/21/2008by Guest

What is included in this kit?
 Reply

A  Answered on 4/21/2008 by InyoPools Product Specialist Patrick P.

This kit includes the Impeller for a 1 HP Full Rate or 1.5 HP Up Rate Northstar along with the Impeller Ring and Seal Assembly.
 Reply


?     Asked on 4/21/2008by Guest

Could you please tell me the measurements of this item?
 Reply

A  Answered on 4/21/2008 by InyoPools Product Specialist Patrick P.

The 519-1080 was 10 inches in diameter but is obsolete and has been replaced by the 519-1081 which is also 10 inches in diameter. The new part # is black and has cup holders. You may view or purchase the item through this link http://www.inyopools.com/Products/00100028008235.htm
 Reply


?     Asked on 7/28/2009by Guest

What is included in this impeller kit?
 Reply

A  Answered on 7/28/2009 by InyoPools Product Specialist Patrick P.

This kits includes the following: Impeller, Impeller Ring, Seal Assembly (Shaft Seal).
 Reply


?     Asked on 1/14/2016by Neil Temple

I have a Hayward North Star pump Model 4010X152NS, ID 21110505051012002, is this the correct rebuild kit?
 Reply

A  Answered on 1/15/2016 by InyoPools Product Specialist Lennox H.

HI Neil, The Northstar Impeller Kit (SPX4010CKIT) is the correct kit for the SP4010X152NS model pump.
 Reply


?     Asked on 8/20/2016by Inyo Visitor

does this kit work for sp4007x10ns
 Reply

A  Answered on 8/25/2016 by InyoPools Product Specialist Lennox H.

Hi, The Impeller Kit (SPX4007CKIT) is the correct kit with for the SP40007X10NS model pump.
 Reply


?     Asked on 7/18/2018by Michael

Which impeller kit will fit the hayward northstar SP4007X10NS, SN 630C32? This housing will be fitted with pump motor USN1102, 1HP, SF 1.4. Thank you in advance.
 Reply

A  Answered on 7/18/2018 by InyoPools Product Specialist Hector F.

The impeller kit part number that you would use is the 5112-024
 Reply


?     Asked on 7/25/2018by Inyo Visitor

Will this impeller kit fit a Hayward Super Pomp II 1.5 HP pool pump
 Reply

A  Answered on 7/25/2018 by InyoPools Product Specialist Lennox H.

Hi. Unfortunately, it will not. Replacement parts for your model pump are listed on the Hayward Super II Pump Parts Diagram
 Reply


?     Asked on 9/12/2019by Francisco Grupp

My pump has a 1.5 HP, 3,450 RPM motor; which impeller kit is the proper fit? I don't understand what is meant by FullRate and UpRate. Thanks, F. Grupp
 Reply

A  Answered on 9/12/2019 by InyoPools Product Specialist Joe S.

Do you have a cat number off the motor label, P/N or Model number? Located in the top right corner of the motor label. 
 Reply


?     Asked on 9/13/2019by Francisco Grupp

Thanks for the quick reply, attached please find a picture of the motor label. The motor is running on 220V

 Reply

A  Answered on 9/26/2019 by InyoPools Product Specialist Hector F.

If you have the Hayward Northstar pump series then this impeller kit 5112-025 would be the correct impeller kit. 
 Reply


?     Asked on 9/16/2019by Francisco Grupp

Attached please find a picture of the motor name plate. Hope it contains the information you requested.

 Reply

A  Answered on 9/17/2019 by InyoPools Product Specialist Michelle B.

Hello, Can you please send a closer picture of the motor label with aside view picture of the entire pump?
 Reply


?     Asked on 3/2/2020by Bill Hernandez

I'd like to get a Impeller kit for my pump. I have a Hayward Pump and about a year ago I replaced the motor with a Centurian motor. All other parts of pump are the original Hayward brand. What kit do I order.

 Reply

A  Answered on 3/2/2020 by InyoPools Product Specialist Patrick P.

Hi Bill, Based on your previous order and your photos, this is the proper Hayward Northstar Impeller Kit - SPX4010CKIT
 Reply