?     Asked on 5/26/2015by d k batty

have hayward valve cover mod 715 20t ser 120d31 will this cover work?
 Reply

A  Answered on 5/26/2015 by InyoPools Product Specialist Patrick P.

Yes this would be the correct valve cover.
 Reply


?     Asked on 8/1/2015by Frank parks

I have a pac fab handle assembly from 1987. only marking is sp715. Will this work? Thanks
 Reply

A  Answered on 8/4/2015 by InyoPools Product Specialist Lennox H.

Hi Frank, The Key, Cover & Handle Assembly 2"- White (SPX0715BA) will work with you SP715 Valve. I would also recommend replacing the Cover O-ring (260) and the Valve Seat Gasket 2in (O-322).
 Reply


?     Asked on 1/11/2016by Inyo Visitor

Does this part number replace WC154-15?
 Reply

A  Answered on 1/12/2016 by InyoPools Product Specialist Megan C.

Hello. Yes, the Hayward SPX715BA / 4701-15 is the replacement for the Sta-Rite WC154-15, Key, Cover & Handle Assembly 2". Original Sta-Rite Sidemount Multiport Valve(s) WC212-150PN and WC212-150PA. Provided for you are the links for the Key, Cover & Handle Assembly 2", the Gasket, and the lid O-Ring if needed.http://www.inyopools.com/Products/07501352020272.htm?Keywords=4701-15http://www.inyopools.com/Products/07501352018281.htmhttp://www.inyopools.com/Products/07501352023015.htm
 Reply


?     Asked on 6/5/2016by Louis

I have a SP70 valve. Will this replacement part work? Does it come with the gasket?
 Reply

A  Answered on 6/5/2016 by InyoPools Product Specialist Patrick P.

Hi Louis, your valve should say SP0711, SP0710, SP0714, SP0715, etc.. Can you supply us with the full part # so we can suggest the right replacement.
 Reply


?     Asked on 6/30/2016by GERRY

how to install this parts
 Reply

A  Answered on 6/30/2016 by InyoPools Product Specialist Alan M.

Here is a great How To Replace a Pool Multiport Valve guide that can help. Just click on the link provided to view the page.
 Reply


?     Asked on 7/31/2016by Joe Galindo

Need to know if this is a direct replacement for Model 715XR50 125GPM
 Reply

A  Answered on 8/2/2016 by InyoPools Product Specialist Lennox H.

Hi Joe, Yes, this Cover & Handle Assy will fit the SP715XR50 valve.
 Reply


?     Asked on 12/25/2016by 52 henryj

Will the spx0715ba key cover and handle assembly replace the handle assembly for my spo715x62 model? Thanks for any info 52henryj!!!!
 Reply

A  Answered on 12/27/2016 by InyoPools Product Specialist Andy O.

Hello- The Key, Cover & Handle Assembly 2"- White (spx0715ba) will work with your SP0715x62 model valve. Please keep in mind this does not come with the spider gasket or cover o-ring.
 Reply


?     Asked on 1/11/2017by Frank

I have a Purex Triton filter model SM-20-3 Serial # 39446926. Will this valve assembly work
 Reply

A  Answered on 1/12/2017 by InyoPools Product Specialist Lennox H.

Hi, Frank. The Valve Top Assy,  2" white w/ decal (E-50-S2) is the correct top assembly for the SM-20-3 valve.
 Reply


?     Asked on 3/18/2017by kurt

I ordered and received the key,cover & handle assembly and the correct spider gasket. I was missing a top ring gasket.Was this supposed to come with the head assembly? What is the part # and correct size.. Thanks.
 Reply

A  Answered on 3/20/2017 by InyoPools Product Specialist Andy O.

Hello Kurt- No the lid cover does not come with the Key, Cover & Handle Assembly 2"- White (spx0715ba) 4701-15. You would need the O-ring, Cover (260)
 Reply


?     Asked on 6/6/2017by Alex

What other parts are needed to install Part#4701-15
 Reply

A  Answered on 6/11/2017 by InyoPools Product Specialist Patrick P.

Hi Alex no other parts will be needed to install this handle assembly.
 Reply


?     Asked on 10/11/2017by Harry Patel

i have model no- wc212-150pn sp-715-2srw can this item works in the body?
 Reply

A  Answered on 10/11/2017 by InyoPools Product Specialist Lennox H.

Hi, Harry Patel. Yes, this Cover Assembly (White) - SPX0715BA or the Cover Assembly (Black) - SPX0715BA3 will fit the WC212-150PN valve.
 Reply


?     Asked on 6/26/2018by Gus

You mentioned the spx0715BA and spx0715BA3 works as replacement for sp7152srw. What about the sp715xr50? Would it work as a replacement for sp7152srw with model WC212-150PN? Thank you
 Reply

A  Answered on 6/27/2018 by InyoPools Product Specialist Lennox H.

Hi, Gus. Unfortunately,  the SP0715XR50 will not work as a replacement for WC212-150PN. The pre-plumed fittings are different. 
 Reply


?     Asked on 4/19/2019by Doug

Is the PART # 4701-15 top assembly the correct part for replacing the PACFAB SP-715 top assembly shown in the provided picture. i don't see any other part numbers on the existing valve..
 Reply

A  Answered on 4/19/2019 by InyoPools Product Specialist Lennox H.

Hi, Doug. Yes, this Cover and Handle Assembly - SPX0715BA will fit your PacFab SP-715 valve.
 Reply


?     Asked on 4/19/2019by Doug

Is PART # 4701-15 a replacement for the PACFAB SP-715 top plate assembly shown in the provided picture.
 Reply

A  Answered on 4/19/2019 by InyoPools Product Specialist Lennox H.

Hi, Doug. Yes, this Cover and Handle Assembly - SPX0715BA will fit your PacFab SP-715 valve. 
 Reply


?     Asked on 6/9/2019by Peter

Will this part fit a Hayward Pro series s244s??
 Reply

A  Answered on 6/9/2019 by InyoPools Product Specialist Lennox H.

Hi, Peter. It will, only if you're using the SP0715 series valve. If you're using the SP0710 series valve P/N SPX0710XBA will be the correct part.
 Reply

  • Commented on 6/9/2019 by Product Owner

    Yes the values are 2 inches not 1 1/2.
     Reply

    • Commented on 6/13/2019 by InyoPools Product Specialist Lennox H.

      Peter, Yes, this Cover Assembly - SPX0715BA will fit the 2" valve used with the Hayward Pro series S244S filter.  
       Reply


?     Asked on 6/10/2019by Peter

I need the gasket which goes with this piece. Item number??
 Reply

A  Answered on 6/10/2019 by InyoPools Product Specialist Steve M.

Peter, the cover gasket to go with your Hayward Pool Products Key, Cover & Handle Assembly 2"- White - SPX0715BA, would be the O-ring, Cover (260).
 Reply


?     Asked on 6/10/2019by Peter

Is SP715 the right tune up kit for this item which includes both gaskets? I have a 2 inch value set-up.
 Reply

A  Answered on 6/12/2019 by InyoPools Product Specialist Matt S.

If your current valve model number begins with an SP715 or SP0715, then the SPX0715BA is a compatible key, cover, and handle assembly. 
 Reply


?     Asked on 9/27/2019by Patricia Anne Kentnor

will this item fit a 2003 hayward filter
 Reply

A  Answered on 9/27/2019 by InyoPools Product Specialist Hector F.

This would actually depend on the model valve that you have. That model should be on the label on the top of the valve. If you cannot locate that information you can always send us an image to upload@inyopools.com so we can review and further advise. 
 Reply


?     Asked on 6/15/2020by Beth

Will this item work for Model number SP0715X62?
 Reply

A  Answered on 6/15/2020 by InyoPools Product Specialist Lennox H.

Hi, Beth. Yes, this Cover Assembly - White - SPX0715BA will for the SP0715X62 model valve. 
 Reply


?     Asked on 6/26/2020by Janet Tubbs

I have an older filter unit sta-rite model S8S70...the Hayward key unit looks like mine with the exception I do not have the model or serial number...HELP
 Reply

A  Answered on 11/10/2020 by InyoPools Product Specialist Hector F.

Hi Janet, could you send us a few photos of the valve or unit that you need parts for and of any labels on the item as well? To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
 Reply


?     Asked on 7/4/2020by Sharon Dippel

Will this work with Sta Rite System 3 Model S7D75 / Model 18201-200H
 Reply

A  Answered on 11/19/2020 by InyoPools Product Specialist Hector F.

Hi Sharon, could you send us a few photos of the complete multiport valve and of the top label looking down on it? To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
 Reply


?     Asked on 5/26/2021by Gerald Hitter

I have a sp0715xr50 multiport valve. I need to replace the top assembly. However, I notice that when I select the slot on the bottom towards me on mine, this is the filter position. I noticed on the label for this that that is the backwash position. Will this not work?
 Reply

A  Answered on 5/27/2021 by InyoPools Product Specialist Craig C.

Hello Gerald.  The orientation of the Key Cover and Handle Assy changes with each of the attached pictures in this replacement suggestion.  It is important to note that the top assembly and the bottom fit together in a specific manner.  Attached please find a picture of the top assembly in Black.  At the 9 o'clock position please note the difference in the shape at the apex of the triangular design.  It is flattened on one side.  This mates to an identical difference on the bottom of the valve.  The orientation of the top assembly is critical to the function of the valve.  The manufacturer identifies the Key Cover & Handle Assy 2" part in Black as #SPX0715BA3 and in White SPX0715BA for their Multiport valve model SP0715XR50.  Key, Cover & Handle Assembly 2"- Black - SPX0715BA3 - 27518-204-100
 Reply


?     Asked on 10/3/2022by Karan DIhal

Hi is this compatible with SP0715BT as well?
 Reply

A  Answered on 10/3/2022 by InyoPools Product Specialist Hector F.

Hi Karan, yes this key cover and handle assembly is compatible with the SP0715BT series. I have emailed you a quote that you can convert to an order as well if you would like. 
 Reply