?     Asked on 6/25/2015by Rich

Should I put some silicon grease on the o-ring when replacing, or even add some every so often to help cut down on leaks or extend life of o-ring? Thanks
 Reply

A  Answered on 6/26/2015 by InyoPools Product Specialist Hector F.

I would advise to use a specific o ring lubricant. Click here to view probably one of the more common types. Yes this would help extend the life of the o ring and help seal.
 Reply


?     Asked on 8/14/2015by Charles Schmidt

Wheere do place the o ring
 Reply

A  Answered on 8/14/2015 by InyoPools Product Specialist Joe S.

Hello Charles, the oring goes between the cover and the cap cover. Attached is the parts breaks down so it would be Key 4A and 5A
 Reply


?     Asked on 4/4/2016by Stephen McGuigan

How often is normal for the replacement of this O ring. It seems to stretch past usefulness in a years time.
 Reply

A  Answered on 4/4/2016 by InyoPools Product Specialist Alan M.

Hello Stephen, There isn't a specific lifespan for the chlorinator o-rings. I would highly recommend using a this lubricant, Magic Lube O-ring Lubricant, to help extend the life of your o-rings.
 Reply


?     Asked on 7/31/2020by Thomas Nestor

I need a new Oring on the cover of my Hayward Chlorinator, but can't tell what the model number is. Can you help?

 Reply

A  Answered on 10/29/2020 by InyoPools Product Specialist Joe S.

Hello Thomas, yes that would be the correct oring or you can order the Hayward CL200 Tune Up Kit - APCK1052.
 Reply


?     Asked on 8/12/2020by Frank Zalek

Will this o-ring, fit my Hayward Bromine (Model, CL220BR) feeder?
 Reply

A  Answered on 10/29/2020 by InyoPools Product Specialist Hector F.

Hi Frank, yes this is the correct lid o ring for the Hayward Brominator model CL220BR. 
 Reply


?     Asked on 8/21/2020by francis x kowalski

Bought this cover ring and installed it but I found that there is additional rubber gasket approx 5 5/8" in diameter located around the cap. Do you sell this ring or do I need to buy a new cover with this ring installed ? Thank you, fxkowalski
 Reply

A  Answered on 8/21/2020 by InyoPools Product Specialist Lennox H.

Hi, Francis. The Hayward Chlorinators only use (1) of these o-rings which goes around the Cover - CLX200B.
 Reply


?     Asked on 8/10/2023by Angela Riley

I have used a PROTECH Cl 200-K Hayward Chlorinator O-ring (O-231V-2) and I am wondering if your Replacement Cover O-Ring for Hayward CL200 Chlorinator, Viton - CLX200K - O-231V would work or is the same? Thanks
 Reply

A  Answered on 8/10/2023 by InyoPools Product Specialist Rich N.

Hi Angela, the CLX200K will be a perfect replacement, or you can get the GOKIT55 which contains all of the o-rings for your 200-Series Chlorinator as well as some lubricant.  
 Reply