?     Asked on 9/3/2016by Inyo Visitor

Installing o-ring
 Reply

A  Answered on 9/23/2016 by InyoPools Product Specialist Lennox H.

Hi. The o-ring is placed in the groove located on the filter lid. You will also need to lubricate the o-ring before installing.
 Reply


?     Asked on 5/29/2017by Joe

The O-ring on my filter/pump is 12"x 1/4" in size. It is a Predator filter with a Tropica pump. I found one in the separation tank area. Will this O-ring fit my filter?
 Reply

A  Answered on 5/29/2017 by InyoPools Product Specialist Hector F.

This is the correct o-ring for the Predator cartridge filter lid.
 Reply


?     Asked on 6/3/2018by Roger Cherry

I replaced the large 9.5 inch O-Ring on my pentair warrior filter and it still leaks, but only on one side. The O ring fit very tight had to streach it a bit . Is there more than one size, you only show one.
 Reply

A  Answered on 6/3/2018 by InyoPools Product Specialist Lennox H.

Hi, Roger. There is only one size tank o-ring for the Warrior filter, this Tank O-ring - 4652-03.
 Reply


?     Asked on 12/29/2018by Emily Wiseman

I want to purchase this O ring and just before I do I want to make sure it is for Pentair model no. 160354 so I do not order the wrong thing. Mine says Clean and Clear but i do not see the work Predator on it anywhere. I would appreciate a reply at your earliest convenience so I can order it.

 Reply

A  Answered on 1/4/2019 by Industry Professional

This is the correct o ring for the Clean and Clear, the Predator was an old model name that uses the same oring
 Reply


A  Answered on 2/18/2019 by Industry Professional

Yes it's the same o-ring
 Reply


?     Asked on 1/28/2019by Dave Donsbach

I,m trying to locate the oring for a Pentair clean & clear cc100 it has the top part #178553. Thanks
 Reply

A  Answered on 1/28/2019 by InyoPools Product Specialist Lennox H.

This Tank O-ring is the correct replacement. 
 Reply


?     Asked on 1/21/2020by Inyo Visitor

I have a Pentair Warrior #56408800 and need a new o ring. My unit is about 11” in diameter. Your ring 4652-03 is much smaller. Do you have a larger one? Thank you
 Reply

A  Answered on 1/21/2020 by InyoPools Product Specialist Lennox H.

Hi. You can use the O-Ring, Generic - 11-1/2" ID, 1/4" - O-88 as an alternate replacement. 
 Reply


?     Asked on 5/10/2020by Robert Gordon

Pentair filter - probably CC150. actual P/N 178555 Rev C. - need a body O ring. - what would be the part needed
 Reply

A  Answered on 5/11/2020 by InyoPools Product Specialist Patrick P.

Hi Robert, This would be the correct replacement o-ring.
 Reply


?     Asked on 5/21/2020by Tammy Genesi

Would this fit my filter?

 Reply

A  Answered on 12/30/2020 by InyoPools Product Specialist Hector F.

Hi Tammy, this is the correct lid o ring for your Pentair Clean and Clear/ Predator cartridge filter. Be sure to use Magic lube as well for the o ring. 
 Reply


?     Asked on 7/3/2020by JANICE T CARNEY

Hi I have a pentair clean & clear cc50 cartridge filter and I need a new o ring for inside the cover but it measures a foot and I do not know which O ring I need to order for it? I read what others have written so I know I need the lubricant too. So as soon as i know which one to order I can finally get my pool up and running!(Hopefully!) Thanks Jan
 Reply

A  Answered on 11/19/2020 by InyoPools Product Specialist Hector F.

Hi Janice, this is the correct tank o ring for the Pentair Clean and Clear cartridge filter. Also, part number 630 is the most commonly used o ring lubricant used on these types of seals. 
 Reply


?     Asked on 8/11/2020by lawrence j rosniak

will this oil ring fit a pintair clean and clear plus model #ccp-420?
 Reply

A  Answered on 10/29/2020 by InyoPools Product Specialist Hector F.

Hi Lawrence, There are two o rings that are compatible with the Pentair CCP filter series. Part number 4654-42 for all models manufactured except from, 3/03 to 7/03, and 4610-38 for models manufactured 3/03-7/03. If you are not sure when your filter was manufactured then you can provide us with the serial number and we can confirm for you. 
 Reply


?     Asked on 10/13/2020by jeff

I'm not sure which Pentair filter I have. Can you assist me? My filter leaks quite a bit around the middle seal and at the bottom clean out. The bottom o-ring is visibly cracked but the middle seal is fairly new and still leaks alot. I'm not sure if I need to replace parts or purchase a new filter system? My pump is a Waterway SMF-115. My pool/spa is about 8000CF in ground

 Reply

A  Answered on 10/23/2020 by InyoPools Product Specialist Joe S.

Hello Jeff, thank you for contacting INYO POOLS. Based on the information we would suggest a new filter. Based on the photos I would recommend the Clean & Clear RP Cartridge Filter 150 sqft. - 160355. This would be an easy install as the outlet would match your current outlet. The inlet would be in the mid of the filter so no need to go from the high angle to a 90 degree to another 90.
 Reply


?     Asked on 11/27/2020by Alfonso

Hi- my filter tends to leak from the lid - which one is the correct size O-ring?

 Reply

A  Answered on 11/30/2020 by InyoPools Product Specialist Hector F.

Hi Alfonso, this is the correct lid o ring for the Sta-Rite Posi Clear 100 sq. ft. cartridge filter model 160351.
 Reply


?     Asked on 5/14/2021by theodore f frederickson

will this fit ptm 70
 Reply

A  Answered on 5/14/2021 by InyoPools Product Specialist Patrick P.

No it will not. For the PTM70 you would need this Top Clamp O-Ring for PTM70 and/or this Bottom Clamp O-Ring for PTM70
 Reply


?     Asked on 8/21/2021by Steven Adang

Is this the correct o-ring for a Pentair CC200?
 Reply

A  Answered on 8/23/2021 by InyoPools Product Specialist Craig C.

Hello Steven.  The Generic Clean and Clear Tank O-ring, part number 4652-03, is compatible with the Pentair Clean & Clear Filter model CC200.
 Reply


?     Asked on 5/19/2023by Don W Coleman

I need a O ring for a predator filter 160318 where the top attaches when you change the filter. What is the correct part number.
 Reply

A  Answered on 5/20/2023 by InyoPools Product Specialist Hector F.

Hello Don, this is the correct filter lid/tank o ring for your Pentair Clean and Clear/Predator series cartridge filter. I have also emailed you an estimate that you can convert to an order if you would like. Item is in stock and ready to ship. 
 Reply


?     Asked on 6/7/2023by Inyo Visitor

Will this o-ring fit my Pentair 160353?

 Reply

A  Answered on 6/11/2023 by InyoPools Product Specialist Hector F.

Hello, yes this o ring is compatible with your Pentair Clean and Clear cartridge filter. 
 Reply