I need an O ring for tank lid Pn 570059 Can you help
Reply
The p/n 570059 is a lid for an American Products Commander Filter, lid o-ring for an American Products Commander Filter.
Reply
I have a stainless steel DE filter tank 48 SQ feet,model #584090 serial#A09825 the O ring of it is deteriorated my pool repair agent got me one but it was too big ,I had to cut it short and apply electrical tape to stick the ends together . now the tank has leak under the clamp ,please advise me the item O ring , This tank was purchased 1992. Thank you.
Reply
Hi Homayoon, The model # 584090 crossed reference to a American Products Titan Stainless Steel D.E., which the replacement tank o-ring will be the 18" Tank O-ring (AP530028).
Reply
Will this O ring work properly with an Anthony Apollo model VA38?
What us the thickness of the ) ring?
Thanks,
Blaine Patrick@comc
ast.net
Reply
Yes this is the correct o-ring for the Anthony Apollo VA-38 filter and its approximate thickness is .31 inches.
Reply
I have a stainless still filter 18" in diameter. Clamp has American Products Inc name on it and a number 530030. I want to make sure that ap530028 would be a correct replacement for my existing o ring. Thanks, Nick
Reply
Hi Nick, The 18" Tank O-ring (AP530028) will work if your unit was manufacture prior to 11/94.
Reply
Will this o-ring fit an Atlas Filter #46336 (p/n FA370)? The data sheet I have for filter assembly list Tank O Ring, 18." Diameter.
Thanks
Reply
Hi Joe, The O-ring, For 18" Tank (AP530028) will fit the Premier Atlas D.E. Filter. However I was not able to cross reference #46336 or p/n FA370 to the Premier Atlas D.E. Filter.
Reply
Hi
I have an American products Titan Vertical grid filter type D.E. model no. 58409000 with a filtrating area of 48 Sq. Ft, currently it has a damaged triangular o-ring installed. Will this oring fit? Is the current triangular one installed the correct one?
Regards
David Meza
Reply
David,Yes, this is the correct tank o-ring for your filter if you purchased the filter before 11/94. If purchased after, the o-ring is part # 4655-10.
Reply
Would the O-Ring #530028 work on an KDI AMERICAN PRODUCTS EARTH FILTER.
Reply
Hi Esther, The only American Products DE filter this o-ring will fit is the American Products Titan Stainless Steel D.E. Filter, I'm not finding a KDI American Products DE Filter.
Reply
Would this O-ring fit on a Heldor Clearflo DE tank?
Reply
Hi Tim, For the Heldor Clear Flo Filter you would need this 18" Heldor Clear Flo O-Ring
Reply
Please would you confirm the shipping price for this item to France? thanks for your response
Reply
Orders shipped outside of the continental United States require special shipping charges over and above our standard shipping charge. Once we receive your order, we will contact you with the exact shipping charge for your order. You will then have the ability to accept the shipping charges or cancel the order. You will not be billed until you accept the shipping charges.
Reply
Hi, I have a vertical grid D.E. 36 sq ft made by American Products Co ( Titan) model no. 582090 will this outing fit the tank lid?
Reply
Hi, Renata. This o-ring will fit the Titan model # 582090 if it was manufactured before 11/94.
Reply
will this fit american model # 584090 48 sqft de filter?
Reply
Hello Joe, Yes, this is the correct tank o-ring for your filter if you purchased the filter before 11/94. If purchased after, the o-ring is part # 4655-10.
Reply
I have the same model filter but I have no idea if it was purchased before 11/94. Is there a way of telling the purchase date or is there a difference in o-rings? Thank you (Model# 584090)
Reply
Jeff, If you do not know when your unit was manufactured, measure the o-ring cross diameter.
Reply
Is the 18 inch O ring mean the diameter of the tank is 18 inches?
Reply
Not necessarily because the o ring may sit in a channel that may make the actual filter diameter different based on the mold design. Ultimately you really want to try your best to locate the specific filter model to cross reference parts for it.
Reply
I have an American Titan Verticle Grid Filter model 4090 and i need the rubber o-ring to seal the tank lid down. Can you help? See attached photo from my tank label.
Hi, I have an American Products Titan CM Vertical Grid Filter Model #57026000 made before '94. Will this O-ring fit?
Thanks.
Reply
Hello Michael. Attached please find an exploded parts diagram for the American Products Titan CM DE Filter. American Products Titan CM D.E Part Key 17 identifies the tank body o-ring as 59021000. O-ring (59021000) The Tank o-ring AP530028 is the correct part number for the tank body o-ring American Products Titan Stainless Steel DE. Attached please find an exploded parts diagram for the Titan Stainless Steel DE Filter for reference. American Products Titan Stainless Steel D.E.
Reply
Hello, We have an OLD Pac Fab DE Filter. We think the part # for the filter 19-3440. We need an O-Ring replacement. We think it is approx 17 3/4". The configuration seems to be beveled but I read that the O-ring can become flattened over time.
What O-Ring do you suggest? Thanks for the help!
Reply
Hi Dixon. There are a number of old Pac-Fab DE filters out there and we probably have parts for all of them! Send some pictures of the filter and any labels that might be on it (even labels on the filter valve can be helpful) to upload@inyopools.com so we can be sure to recommend exactly what you need.
Reply
do you have an o-ring that will fit an American products Titan CMVertical grid filter model 57024000? Thanks
Reply
Hello Guy. Attached please find an exploded parts diagram for the American Products Titan CM DE Filter. American Products Titan CM D.E. Replacement tank body o-ring, Key item 17, is the compatible replacement. O-ring (59021000)
Reply