?     Asked on 6/16/2015by Herb

My pump is leaking in the area of this O-ring. Is there a larger O-ring that would solve this problem or another solution?
 Reply

A  Answered on 6/17/2015 by InyoPools Product Specialist Joe S.

I would inspect for a crack. also have you applied lube to the oring to create a nice seal.
 Reply


?     Asked on 5/9/2016by Bruce

Will this part fit model #S244T ?
 Reply

A  Answered on 5/10/2016 by InyoPools Product Specialist Matt S.

Yes, the 4822-04 o-ring will fit the Hayward Pro Series S244T Sand Filter.
 Reply


?     Asked on 5/27/2016by Dave

Does this o-ring fit the Hayward swim pro c100 cartridge system?
 Reply

A  Answered on 5/27/2016 by InyoPools Product Specialist Patrick P.

Hi Dave, this particular o-ring does not fit the Swim Pro Cartridge system, however we do carry the correct Swim Pro Tank Body O-ring here you may also find the Parts Diagram for the Swim Pro Cartridge System helpful.
 Reply


?     Asked on 9/17/2016by Jim

Could you please tell me if this will fit a 22 inch sand filter with a L44311 on a label on the bottom of the tank?
 Reply

A  Answered on 9/28/2016 by InyoPools Product Specialist Alan M.

Unfortunately, I have no information that comes up with the L44311 number you provided. If you have any additional information, please reply to this and I will be happy to assist you further.
 Reply


?     Asked on 3/23/2017by Inyo Visitor

having trouble getting this o ring to slide to slide together with the body and motor any suggetions it goes together fine without the o ring but water leaks out
 Reply

A  Answered on 3/24/2017 by InyoPools Product Specialist Scott W.

What is the model of the pump or filter that you are trying to stop from leaking?
 Reply


?     Asked on 6/5/2017by bob

will this o-ring work on hayward model no. s244t
 Reply

A  Answered on 6/11/2017 by InyoPools Product Specialist Patrick P.

Yes this does work on a Hayward S244T sand filter.
 Reply


?     Asked on 2/19/2018by Patrick M. Tracy

Will this gasket fit on a S220T sand filter?
 Reply

A  Answered on 2/19/2018 by InyoPools Product Specialist Lennox H.

Hi, Patrick. Yes, this O-ring will fit the Hayward S220T filter. 
 Reply


?     Asked on 7/4/2019by steve

I need a cap for a hayward s244s sand filter and ring and top screw
 Reply

A  Answered on 7/4/2019 by InyoPools Product Specialist Lennox H.

Hi, Steve. The replacement parts you need are Dome - SX244K, Dome O-ring - GMX600F, Cap, Air Relief - SX200G, and Air Relief Cap O-ring - SX200Z5
 Reply


?     Asked on 8/10/2019by georgia lutcavish

i need a 2" top mount multipurpose valve filter gasket 0 ring Model # DVASSY 7-POS 1-1/2 NPT. Do you have it?
 Reply

A  Answered on 9/20/2019 by Industry Professional

Check out our Diverter repair kit 39251509K you might be better to change this.
 Reply