?     Asked on 6/16/2017by Jack76015

New motor from Inyo. Works perfect. New pump lid and o-ring. New impeller gasket. New face plate gasket. New shaft seal. New pressure gauge for top of filter. New filter grids. PVC has been leak tested with dye ... no leaks . The problem: Pump pressure only 3-5 PSI when it should be 10. Not losing water out of pool. Massive bubbles under clear pump lid. Ready to pour concrete in pool and make tennis court! REALLY need some help. Thinking maybe clogged inlet to pump plumbing?
 Reply

A  Answered on 7/23/2017 by InyoPools Product Specialist Alex V.

Jack, With all that work that was done, air got into the system. Please be patient. The air will work itself out. if you have an air release valve on the filter tank, you can manually release some of the air periodically to speed the process. 
 Reply


?     Asked on 4/14/2018by Donna Hester

Will this fit a Sta-Rite P4RA6F 187L ? I also need the small oring for the bottom of pump
 Reply

A  Answered on 4/17/2018 by InyoPools Product Specialist Lennox H.

Hi, Donna. It will not, you will need the Trap Cover O-ring - U9-375.
 Reply


?     Asked on 7/2/2018by Deborah Williams

Will this fit a Sta-rite Dura-Glas II
 Reply

A  Answered on 7/2/2018 by InyoPools Product Specialist Andy O.

Hello Deborah- The correct o-ring for your Sta-Rite Dura-Glas II and Max-E-Glas II is the O-ring, Trap Cover (5105-13) - U9-375 Part #5055-18
 Reply


?     Asked on 7/19/2018by Alan

Looking for 0 ring for a Sta-rite P2Ra53- then hard to read 124L? looks like about 6.75" lid, 6.5" centerline
 Reply

A  Answered on 7/19/2018 by InyoPools Product Specialist Lennox H.

Hi, Alan. This Trap Cover O-ring will for your series pump model. 
 Reply


?     Asked on 8/21/2019by Dianne Trivers

LOOKING FOR GASKET /O RING FOR STA-RITE STRAINER BASKET GASKET- #PZRA5E-181L
 Reply

A  Answered on 9/12/2019 by InyoPools Product Specialist Hector F.

The 5056-15 is the correct strainer lid o ring for the P2RA5E-181L.
 Reply


?     Asked on 12/18/2020by Matt Stewart

I'm looking for a o-ring for a trap with a pump model of P4E6E-187L. Thank you!
 Reply

A  Answered on 12/21/2020 by InyoPools Product Specialist Hector F.

Hi Matt, the correct trap strainer o ring for the Sta-Rite P4E pump series is part number 5066-C1
 Reply


?     Asked on 6/1/2021by Is this the correct part

Hello, is this the correct part for A5YF-125L?

 Reply

A  Answered on 6/1/2021 by InyoPools Product Specialist Patrick P.

Hi, Your full model # is P2RA5YF-125L and yes this is the correct replacement o-ring for you.
 Reply


?     Asked on 3/8/2023by Inyo Visitor

Please confirm this will fit my StaRIte P2RA5f-12xx. I can't read the last two characters. Hopefully they are not the most important!
 Reply

A  Answered on 3/8/2023 by InyoPools Product Specialist Craig C.

Hello.  The Sta-Rite JWPA, Dura-Glas Pump Lid O-ring - U9-229 - 435 is the correct pump lid o-ring for the Pentair/Sta-Rite P2RA5F-12xx.  The significant characters for Sta-Rite pump identification in this case are the P2RA5F.   Attached please find the Sta-Rite Dura-Glas and Max-E-Glas exploded parts diagram for reference.
 Reply