how to remove piston rod assembly
Reply
Hi Leon, You can find the dissembling instructions in the Pentair Slide Valve Owner's Manual.
Reply
I need to purchase the piston valve assembly for the pentair 263064. Will this fit? If not, please direct me to the product that will fit. I replaced this valve (the backwash valve) once before using inyo to purchase the part...but it seems harder to find the right product/model fit this time. thanks
Reply
Hi, Joe. The Piston Shaft Replacement Kit - 263055 is the correct assembly for the Pentair Valve 263064.
Reply
Do you sell a kit with just the washers? My piston rod assembly (27-3241) is fine but the washers are beginning to wear out. If you have just the washers, I would be interested in a purchase. If so what would be the cost and process?
Reply
Hello Jeffery- Here is a link to the Pentair - Pac Fab 2" PVC Slide 26-1165 Parts page. I would recommend viewing that page to see the different part options we have available. I am confident we have the parts you are looking for.
Reply
Does this piston rod assembly fit the Pentair FNSP60? If not, do you sell the assembly?
Thank you
Reply
As long as the valve used is the model 261165 then this piston rod would work. At one point that valve model was used on your model filter.
Reply
The 360 view appears to show the piston rod with a metal rod. Is it metal or plastic. The handle broke off of mine primarily because it is plastic. Would love if the handle and rod were stainless steel.
Reply
Hi Jeffrey, The handle and rod on this are plastic. We do have this kit here which has a plastic handle and a stainless steel rod. Piston Rod Assembly for Pentair Filters w/ Stainless Rod
Reply
The part # on my FNS Pentair piston valve is 27-3241 Is the part shown compatible??
Reply
Hello William. The Piston Rod Assembly CMP part #4600-3241 is an after-market replacement for Pentair part #273241.
Reply
Is this assembly compatible with the push/pull valve for a Nautilus NS36?
Reply
This is a Piston Assembly for the following Pool Filter Valve...Pentair 2" Slide Valve for DE & Sand Filters - Black - 263064This Valve will fit on the Pentair / PacFab Nautilus NS36.
Reply
Does the piston rod assembly fit the Pentair FNSP48 filter?
Reply
Hello Anderson. The Customer Molded Products Piston Rod Assembly is an after-market replacement for Pentair part 273241. This Piston Assy is a repair part for the Pentair DE and Sand Filter 2" Slide Valve, not the Pentair FNS Plus 48 Filter per se. Attached please find a product description for the Pentair DE and Sand Filter 2" Slide Valve. 2" Slide Valve for Pentair DE and Sand Filter - Black - 263064
Reply
I have a Purex Triton FNS Plus DE filter. The backwash valve leaks - probably the "O" rings on the plunger. Do you have a replacement plunger setup or "O" rings that would fit. If so, could you email me part numbers so I can order them. Or, do I need a whole new valve. If so, do you carry it and what is the part number.Pipes are 2"
Thank you for your help.
Reply
Hello Doug. Attached please find an exploded parts diagram for the Pentair Push Pull Valves 263052, 263053, 263064. Valve model 263064 is the new style that replaced Pentair Push Pull Valve model 261165. Repair parts are identified on this diagram. Pentair Push Pull Valves 263052, 263053, & 263064 Attached please also find an exploded parts diagram for the Pentair Push Pull Valve 261165. Pentair - Pac Fab 2" PVC Slide 26-1165 Repair parts are identified on this diagram. The appropriate repair parts are dependant upon which of these valves is installed on your Purex Triton FNS DE Filter.
Reply