I need a replacement C53 23P. I also need the screw in plug at the bottom if that is not supplied...and the square gasket going to the pump. Can you help with part numbers please?
Reply
Hi Paul, The item on this page is the correct replacement for the C53-23P. Here is the Sta - Rite Square Gasket used with this pump housing and here is the Sta-Rite Drain Plug used with this item.
Reply
I need this part and the gasket and drain plugs that fit it. What are the part numbers ofor the gasket and drain plug?
Reply
Hi Will, The Pot to Volute Gasket, Strainer O-ring and Drain Plug can be used with this Strainer Trap Body.
Reply
May I just buy the strainer basket without the body trap? If so, what is the part number for the strainer basket and the price of the part?
Thanks,
Morgan
Reply
You sure may buy just the strainer basket! As long as you have a Sta-rite Dura-Glas or Max-E-Glas pump, the correct strainer basket is the Basket, 5" Trap (c108-33p).
Reply
I need a motor for a sta-rite pump number p2ra5c rotation 1e00y c53-23p. Is there a motor that fits . All I have is the pump. Thanks
Reply
Hi Blaine, the proper replacement motor for your p2ra5c pump is this USQ1052 1/2 HP Replacement Motor
Reply
Is it possible to order ved rubber ring kode C53-23P?
Reply
Hi. The following gaskets and o-ring can be used this housing, Pot To Volute Gasket - C-20-103-R, and Trap Cover O-ring - 435.
Reply
Do the bolt holes line up the same as a 354125 strainer pot? I need a replacement and apparently they are no longer available.
Reply
Hi. Unfortunately, this Strainer will not replace p/n 354125.
Reply
Can I get the union that connects it to pvc? What is the part number? And is it 1.5in or 2in?
Reply
Where I can find a housing that connect strainer to pump motor. It has a crake. I need find a replacement. My Strainer is good but plate connect has a crake
I am needing to replace our pool pump strainer pot that was cracked during our winter storm in February. I have included a picture of our pool pump (Century). I am told this is the part that would replace the old strainer pot. Would this fit with our pump?
Hello Janae. The Pentair Pump Body part number C153-53P1 is the correct replacement part for your pump. You may also wish to replace the gasket, pot to volute, part number c-20-103-r at the same time. Gasket, Pot To Volute (c-20-103-r) - G-99R
Reply
For a P2R-A5YF (pre 2000) this seems like a compatible part? My bolt holes are 3 1/4 or 3 5/16 a part, 3" center hole and outside of flange 4 1/2 square?
Reply
Yes Steve, this Sta-Rite Dura-Glas & Max-E-Glas Pump Body (c153-53p1) (c53-23p) will fit your DURA-GLAS P2R pump. We also have this Trap Assembly - PKG115 available, which includes a strainer, the strainer lid, body gasket and screws, and strainer gasket.
Reply