Will this and the recommended spider gasket work with a Pentair SM-20-2, model SM2-PP2?
Reply
Hello Randy - This top assembly and spider gasket will fit the Pentair SM-20-2/SM2-PP2.
Reply
Will this fit a 2" SM-20 Praher valve?
Thanks, Roy
Reply
Hi Roy, Yes this top valve assembly does fit a Praher SM-20 Valve.
Reply
Will Praher model #4600-1152 (e-50-s2) be compatible as a replacement part for my Purex Triton Model SM-20-2 backwash valve assembly?
Reply
Hi Kevin, Yes the E-50-S2 will fit the Purex Triton Model SM-20-2 backwash valve assembly.
Reply
Will this work with my Purex Triton Model 20-3?
Reply
Steve, This Top Assy 2" White w/ decal (E-50-S2) can be used to replace the cover on the SM20-3 valve.
Reply
Does this part come with a new set of bolts and nuts?
Reply
Ronald, The Top Assy, Valve 2" White w/ Decal (E-50-S2) does not come with the Top Valve Screw or the Top Valve Screw Nut, there sold separately.
Reply
will this top assy work with my purex trition model sm20-2 valve ? also the spider gasket that ihave on my order.
Reply
Hi Carl, The 2" Valve Top Assy white w/ decal (E-50-S2) will fit on the SM20-2 Valve. You replace just the 5-Spoke Diverter Gasket (271148) or get the Tune Up Kit (APCK1069).
Reply
Hi,
Will this part fix my Praher Model SM-20-1 s/n 1914877?
Thanks,
Reply
Hi Daniel, this SM-20 valve top assembly along with the SM-20 Spider Gasket typically fixes any leaking issues with the SM-20 valve.
Reply
Will this fit a Pentair model SM-20-3?
Reply
Will this part fit on the pentair sm-20-2 with out chaning the lower spider gasket and will the flow remain the same? Thank you
Reply
Hi Craig, The 2" White Valve Top Assy (E-50-S2) will fit onto your SM-20-2 Valve without changing anything and the flow will remain the same.
Reply
I relly need help, have a very old inground pool from early 70's. I have a Purex, triton, Model SM-20-2 multiport valve. I cannot turn the handle anymore and water is filling the chamber and backwashes into pool. I need a new one, need a compatible mate.
Reply
Hi Louise, I would suggest this SM20-2 Replacement Valve
Reply
I installed the sm20-ao , new de filter panels and now the water pressure from the pump to the filter is crazy high. Any idea as to why?
Reply
Hi Joel, You may need to open the air relief valve on the filter and check to see if the correct amount of D.E. powder has been added. Also check the pressure gauge to make sure it's not giving you a faulty.
Reply
I have a pool that was built in the late 80s with a pac fab selector Valve that is not working properly and the handle is broke. Not sure of the model #. Will this fit?
Reply
Hi Bill, In order to conform if this assembly will fit I will need to know the model of the valve.
Reply
i have a pentair valve model SM-20-3 with a sand filter.is this the correct valve replacement
Reply
Yes, the 4600-1152 is the correct valve top assembly for your Pentair-Praher SM-20-3.
Reply
I have the Pac Fab DE DNS 48 filter. This cover looks like the correct one for me, but apart from the looks, what do I need to check to see if it is correct? The label on my current valve is totally gone apart from xxxx3207 in the top right which I believe to be the label p/n. I do know at least the valve is a side mount, in that it is positioned in front of the DE filter.
Reply
Hi, Chris. We will need the valve model number in order to confirm if this top assembly will fit the valve you have. You can also send us photos of the valve since the numbers are totally gone.
Reply
Will this part fit my Pentair SM 20-3. It also says SMS-PP3 on top
Reply
Hi, Ray. Yes, this top assy will fit the SM20-3 valve. The Diverter Gasket - E-12-S2 is not included which is a recommended part when replacing the top assembly.
Reply
I have a sta-rite multiport valve WC212-150pn - (10 bolts on top) very hard to turn and leaks a bit through the top --
will this top assy fit my valve?
Reply
Hi Steve, No this top assembly would not work on the Sta-Rite WC212-150pn valve. You would require the WC212-150pn Top Valve Assembly and a WC212-150pn Spider Gasket.
Reply
I'm having trouble with the handle spring and trouble turning the nob - Do I need to replace the valve key hub and the spider gasket? What are the compatible parts? Will the 4600-1152 fit my praher sm-20 2 inch backwash valve sm2-pp3 , 125 gpm?
Reply
Hi, Mic. Replacing the Top Assy 2" - E-50-S2, Cover O-ring - E-7-S2 and the Diverter 2in 5-Spoke Gasket - E-12-S2 will get you valve up and running smoothly again.
Reply
i have a pintair sm10-3 says sand #on pump 27-1140 will this work for me thanks
Reply
Hi Shannon, The Pentair 261173 Valve would be the replacement for the SM10-3
Reply
Will this fit Cristal flo sand filter mod. T-240bp-2 the valve is a wicor
Reply
Hi George, the Sta-Rite 77704-0104 Top Valve Assembly would be the proper assembly for the T-240bp-2 filter.
Reply
What are the functions of the Top assembly valve?
Reply
Hi Don, here are the valve functions and their different uses. 1. Filter - For normal filtering and regular vacuuming. 2. Backwash - For cleaning filter sand bed of accumulated debris. 3. Rinse - Use after completing backwash cycle to ensure all dirty water is rinsed out of the filter to waste. 4. Waste - By-passes the filter for draining or lowering pool water level and for vacuuming heavy debris directly to waste line. 5. Recirculate - Water is recirculated through the valve, by-passing the filter. 6. Closed - Shuts off the flow from the pump to the filter.
Reply
Same issue as most of the others. Water leaking up from the handle, no longer springing back into place and difficult to turn. Looking for a replacement for a Sta-rite md: 18201-0300 diverter valve side mount 2 inch assembly.
Thanks
Reply
Hi Michael we would suggest this handle assembly on this page along with this Spider Gasket to resolve your problem.
Reply
How do I know if I put the valve with the handle on my sand pump back on the right way
Reply
Hi, Tina Woodard. If it was not placed in the correct position, then the valve functions will be off. You can use our How To Replace a Pool Multiport Valve Spring for instructions.
Reply
Does this come with a new gasket/o-ring to install to valve body?
Reply
Hi, Joe. The Cover O-ring - E-7-S2 and the Diverter 2in 5-Spoke Gasket - E-12-S2 are not included with this Top Valve Cover assembly.
Reply
I have a Sta-Rite 2" Multi-port Selector Valve 18201-0200H. It leaks a small amount from the top (handle area) and a lot out of the drain / backwash hose. Which part(s) do I need to repair and stop leakage? Thanks.
Reply
Hi, Larry. You can use the following parts or options to repair your valve. Option 1: replace the seals using either the MPV 2" Tune Up Kit (NO SPRING) - APCK1069, MPV 2" Tune Up Kit w/Spring -APCK1069S. Option 2: replace the Top Valve Assy - E-50-S2 (White) or E-50-S2B (Black) along with the Cover O-ring - E-7-S2 and the Diverter Gasket - E-12-S2.
Reply
I have a Pentair 261152 -- would it be cheaper for me just to buy this -- instead of all the parts?? Thanks
Reply
Hi, Rhonda. Yes, replacing the Valve Top Assy is cheaper than getting all the parts.
Reply
Hi,
Is this part also known as the multiport key assembly? Does it include handle, plastic bearing/washer, spring, o rings etc. - basically everything but the spider gasket, housing & plumbing? Is that correct?
Reply
Hi, Megan. Yes, however, it does not also include the cover o-ring.
Reply
What is the difference in this top assembly and the Praher 270067 2" top assembly valve listed on Amazon at $117? Do both work on the Pentair SM-20-2
Reply
will this valve replace the, model SM2-PP2 . . . ?
Reply
I need a 2" Multi-Port selector valve for my STA-RITE 32155-4158 Valve Model 18201-0300 will this one work ??
Hi, Pat. Yes, this Top Valve Assy - E-50-S2 will work as a replacement. The Cover O-ring - E-7-S2 and the Diverter 2in 5-Spoke Gasket - E-12-S2 are not included and is highly recommended to be replaced.
Reply
I have a 15 year old Purex SM-20-2 top valve that needs to be replaced. Will this part fit? Also, do you recommend replacing any Orings, gaskets, etc. when doing this?
Reply
Does this top valve work for pentair sms-pp29
Hi Mike, This top valve assembly will work as a replacement top valve assembly for the SM-20 valve in your picture.
Reply
I also need a spider gasket too you know which is capable thanks
Reply
Hi Mike here is the Spider Gasket for your valve
Reply
Would there be a drawing for this? Trying to figure out if it will fit my system.
Reply
Hi, George. You can use the Pentair - Praher 2" TM-22 & SM-20 Parts Diagram as a reference.
Reply
This is a parts drawing, it points out the part #'s of the parts. No use for measurements. :(
Reply
Many of the parts for the valve may have dimensions listed under their main images however if you need to confirm compatibility then the best way is to locate the filter model itself and we can advise which valves are compatible with it.
Reply
Please see the attached photo. is this the correct replacement part? Also, what is the proper gasket for this unit.
Thanks,
Hi Sean, Yes this is the correct top assembly replacement for your SM20-2 valve and here is the proper SM20-2 Spider Gasket you will need for your valve.
Reply
I want to replace my 15y.o. Praher SM20-1 top assembly. Is the E-50-S2, Part # 4600-1152 the correct replacement?
Reply
Hi Lou, Yes this E-50-S2 is the proper replacement top assembly for your Praher SM20-1
Reply
Hello. I have an SM20-1 and need a spider gasket. I see the part for SM20-2 in many places but nothing for the -1 model. Are they interchangeable? Thank you!
Reply
Hi Teresa, Yes this E-50-S2 is the proper replacement top assembly for your Praher SM20-1. If you just want the spider gasket then you will need this SM20 Replacement Spider Gasket
Reply
i need to replace my praher sm20-1 top assembly do you have the replacement part
Reply
Hello Raymond. The Praher Top Valve Assy 2' - White, part number E-50-S2, is compatible with the Praher Multiport Valve model SM20-1. The Top Valve Assy 2' - Black, part number E-50-S2B is compatible with the Praher Multiport Valve model SM20-1. Top Valve Assy., 2" Black - E-50-S2B
Reply
Does this fit/replace the Praher SM0-A0?
What spider gasket do I need?
Hello Troy. The Praher Top Assy E-50-S2 is compatible with the Praher SM0-A0 Multiport Valve. E-50-S2 The Diverter Gasket (Spider Gasket) E-12-S-2 Diverter Gasket is the correct replacement. Attached please find an exploded parts diagram for the Praher 2" Multiport Valve SM0-A0. Praher 2"
Reply
What top valve ASSY do i need for Pentair 2" valve pn 261055
Reply
Hello Robert. The Top Assy, Valve 2" White w/ decal - E-50-S2 is the Top Valve Assembly replacement for the Pentair Multiport Valve model 261055. Attached please find the Pentair - Praher 2" TM-22 & SM-20 exploded parts diagram for reference.
Reply
My old valve is SM2-PP2, Will this
e-50-S2 replace it
Reply
Hello Tom, yes this is the correct top valve assembly for your SM2-PP2 series multiport valve. I have emailed you an estimate that you can convert to an order if you would like as well.
Reply
Will this part fit my Pentair multiport value? Part number 261055
Reply
Hello Toni, yes this top valve assembly is compatible with your Pentair valve model 261055. I have also emailed you an estimate that you can convert into an order if you would like. Item is currently in stock and ready to ship.
Reply
Will this replace a pentair Valve P/N 261152? Thank you.
Reply
Hello Dennis, yes this top valve assembly is compatible with the Pentair multiport valve model 261152. I have also emailed you an estimate that you can convert to an order if you would like. Item is currently in stock and ready to ship.
Reply
Hi, is this an original OEM part? Thanks!
Reply
Hello, this is a aftermarket part; Top Valve Assy, 2" w/ D.E. and Sand Decals - 270067 is the OEM equivalent to this product.
Reply