?     Asked on 7/10/2014by Guest

I have an American Products backwash valve model # 987408 with a black body & lid, 10 bolts and 6 positions near the handle. The valve is 10 years old and still works but I would like to replace the cover handle assembly and spider gasket, is this the correct handle assembly?
 Reply

A  Answered on 7/10/2014 by InyoPools Product Specialist Patrick P.

Yes this is the correct handle assembly for the American Product 987408 and here is the spider gasket for your valve. Please note that these parts are for the 2" version of this valve, meaning that the valve accepts 2" plumbing and not 1.5"
 Reply


?     Asked on 3/24/2015by nancy

My valve model is Purex Triton SM20-2. I would like to replace the top assembly. Will this the correct one?
 Reply

A  Answered on 3/25/2015 by InyoPools Product Specialist Robert M.

Hello Nancy - Part number 270067 (4600-0067) is the correct top assembly for your valve.
 Reply


?     Asked on 4/23/2015by Inyo Visitor

My valve is Purex Triton SM-20-3 will this replace mine?
 Reply

A  Answered on 4/23/2015 by InyoPools Product Specialist Lennox H.

Yes, This part can be used as a replacement on your multi-port valve.
 Reply


?     Asked on 2/1/2016by Bill

I have a Praher SM2-PP2 DE Filter Valve with a SM20-2 Cover. Is this the correct replacement top assy? Thanks
 Reply

A  Answered on 2/2/2016 by InyoPools Product Specialist Brian M.

Bill. That is the correct OEM part. There are two generic parts that are considered just as good, they just do not say Pentair. They are part numbers 4600-1152 and 4602-1152.  The 4600 is white, while the 4602 is black, but both will operate exactly the same.
 Reply


?     Asked on 5/16/2016by Gil

I have a Pentair SM 20-2 Multi-port Valve (DE version). Is this the correct replacement top assembly?
 Reply

A  Answered on 5/18/2016 by InyoPools Product Specialist Lennox H.

Hi Gil, This Top Valve Assy will fit the SM20-2 valve, the Diverter Gasket (271148) is not included.
 Reply


?     Asked on 6/8/2018by wayne brown

I have an older multi-port valve , Pac-Fab either SM-20-3 or 9M-20-3 . I need the top assembly, handle, spring, o-ring valve port, looks like your 270067. Will that fit my unit or do you have one that will? Thanks
 Reply

A  Answered on 6/9/2018 by InyoPools Product Specialist Lennox H.

Hi, Wayne. Yes, this Vale Top Assy (OEM) will fit your model valve. There is also an Aftermarket Valve Top Assy - E-50-S2 that you can use. The Cover O-ring - E-7-S2 and the Diverter Gasket - E-12-S2 will have to be purchased separately. 
 Reply


?     Asked on 6/21/2018by WILBUR GENE BLACK

i HAVE AN OLD (1968 PENTAIR MODEL SM 20-4. IT APPEARS TO BE LARGER THAN 2" GOING INTO FILTER. iS THIS THE RIGHT CHOICE?
 Reply

A  Answered on 6/22/2018 by InyoPools Product Specialist Lennox H.

Hi, Wilbur. Yes, this Top Valve Assy - 270067 will fit the SM20-4 valve. 
 Reply


?     Asked on 5/14/2019by Jim

I have a Purex SM-20-2. Will this replace it and do I need any other parts or kits to go with it?
 Reply

A  Answered on 5/14/2019 by InyoPools Product Specialist Hector F.

This Top Valve Assy will fit the SM20-2 valve, the Diverter Gasket (271148) is not included.
 Reply


?     Asked on 3/6/2020by Dave

With this fit DE filter FNS PLS 48?
 Reply

A  Answered on 3/6/2020 by InyoPools Product Specialist Patrick P.

Hi Dave, Would it be possible for you to send a few photos of your valve, to do so simply click on the reply link below to post photos. If you can't send photos then can you pull any part #'s from your valve? Is your valve mounted on the side of your filter? Is the plumbing going into the valve 1.5" plumbing or 2" once we get this information then we can suggest the proper replacement? Thanks so much
 Reply


?     Asked on 5/4/2020by Richard Schossow

Would this replace the top valve for my Pentair Model SM-20-3? See attached. I just need the top valve, as it the spring and handle are pretty shot, and it keeps ripping up my spider gasket. Thanks for you help :)

 Reply

A  Answered on 5/4/2020 by InyoPools Product Specialist Patrick P.

Hi, Richard. Yes, this Vale Top Assy (OEM) will fit your model valve. There is also an Aftermarket Valve Top Assy - E-50-S2 that you can use. The Cover O-ring - E-7-S2 and the Diverter Gasket - E-12-S2 will have to be purchased separately. 
 Reply


?     Asked on 5/7/2020by Tonya Williams

Will this valve replace Praher SM20-1?

 Reply

A  Answered on 5/7/2020 by InyoPools Product Specialist Patrick P.

Hi Tonya, for the SM20-1 you will actually need this SM20-1 Top Assembly
 Reply

  • Commented on 5/7/2020 by Product Owner

    Thank you so much!
     Reply

    • Commented on 5/8/2020 by InyoPools Product Specialist Patrick P.

      Thanks Tonya!
       Reply


?     Asked on 1/22/2021by Jonn

Will this cover suit for my multiport valve?

 Reply

A  Answered on 1/28/2021 by InyoPools Product Specialist Hector F.

Hi John, yes this is the correct top valve assembly for the valve included in your photo. 
 Reply


?     Asked on 9/13/2022by Roman Castro

it comes with the gasket?
 Reply

A  Answered on 10/19/2022 by InyoPools Product Specialist Hector F.

Hello Roman, the Diverter Gasket - E-12-S2 will have to be purchased separately.
 Reply