Will this label work for the Prather upper half because the labels are back word i.e. Label backwash is really filter and so on please help I know this but no one else in household will figure it out thanks
Reply
Hi Bob, This Label can be used with the Pentair - Praher TM12 & SM10.
Reply
My Pentair multiport valve is about 18 years old and I'm having a hard time reading the instructions on the top. Is this the right part to replace the worn out directions?
Reply
Hi, Keith. Unfortunately, it's hard to say without know the valve model. You make have to replace your entire valve using your filter model as a reference since the valve is unidentifiable.
Reply
The only identifiable number i can find on my multiport valve is the label part number (27-1141) which i undertand only pertains to this label. IO am trying to figure out the actual multiport part number as I am needing to replace the spider gasket and other associated gaskets with this multiport valve.
Reply
Do you have the valve 27-1141 no just the gasket
Reply
Hi Jerry, the 271141 is just the part # for the label that is used on quite a few valves. Is there a TM or SM part # on the valve if so could you supply that or could you post a few photos? To supply additional information or photos please click the reply link below.
Reply
Hi is this the correct gasket for this model sm102de.Also is there 2 gaskets or 1
.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pentair Label (271141)")
Hi Michael, the correct spider gasket for the Jandy model SM202 multiport valve is part number 4600-1148. You will also need to glue the gasket into the valve and can use the clear RTV silicone part number 6558-0. There is only one spider gasket for this valve.
Reply
