?     Asked on 6/1/2016by Bill

My multi-port valve has a slight leak, think I need to replace the oring, model is Hayward I think 720-50. What do you recommend.
 Reply

A  Answered on 6/6/2016 by InyoPools Product Specialist Lennox H.

Hi Bill, Hayward does not have a 720 model multiport valve. In order to get you the correct cover o-ring we will need to know which valve you have. You can send us photos of the valve to see if we can identify it.
 Reply


?     Asked on 6/20/2017by Josh

I have a Hayward SPX0710XBA17 replacement handle for valve and all the o rings I can have are to thin for the new handle in diameter. Any help?
 Reply

A  Answered on 6/21/2017 by InyoPools Product Specialist Lennox H.

Hi, Josh. You can locate all the replacement part that is compatible part # SPX0710XBA17 on the Hayward Multiport Vari-Flow SP-710X parts page.
 Reply


?     Asked on 1/26/2019by Steve Baker

Have a Baker Hydro series II with a Hayward Mod. 712 Vari/flo valve. Need "o"ring just under valve that seals to the tank flange. Mine measures +_ 8 1/4" Dia. Not 6" dia. like the description shown. Help please.
 Reply

A  Answered on 1/28/2019 by InyoPools Product Specialist Lennox H.

Hi, Steve. Unfortunately, none of the Hayward valve cover o-rings are that large. This is the correct Valve Cover O-ring for the SP712 valve. 
 Reply


?     Asked on 2/18/2019by Inyo Visitor

will this part fit Vari-Flow filter control valve SP-710XR50
 Reply

A  Answered on 2/18/2019 by InyoPools Product Specialist Hector F.

Yes, this o ring will work on that model valve. 
 Reply


?     Asked on 5/4/2020by CD

Will this fit with an SPX0710XBA17? The cross section looks bigger than 1/8 inch...
 Reply

A  Answered on 12/9/2020 by InyoPools Product Specialist Hector F.

The correct o ring for the Hayward Vari Flo multiport valve model SPX0710XBA17 is part number 4700-05A
 Reply


?     Asked on 12/22/2021by Chris

Hello, will this fit my Hayward SP0710X62
 Reply

A  Answered on 12/22/2021 by InyoPools Product Specialist Rich N.

Hi Chris, this o-ring will go under the cover of your SP0710X62 valve.  When installing it, be sure to clean the surfaces well and put some lubricant on it to help it seal and last a long time.  
 Reply