When will above item ship and how long to get to zip 37659? And will it replace jac s15lr-6-s1?
Reply
This item is currently in stock and would take 3 to 5 business days to your ZIP Code. Yes this will replace the Jacuzzi S15LR-6-S1
Reply
Will I be able to remove my twist lock plug from my burnt out jacuzzi and splice it to this new pump?
Reply
Yes you could use your old cord on the new pump. You would not need to splice as there should be spade connectors where the cord attaches and detatches so you should be able to loosen these to remove and re-apply cord.
Reply
this price does include 1.5 hp motor, mounting bracket, etc. as shown in picture? does it not?
Reply
The price for the Jacuzzi SLR 1.5 HP Pump Vertical Discharge does include everything in the picture.
Reply
Can you please tell me if this is compatible to a S15LR3S1? My Serial # is 13858 on the pump I currently have. Thank you!
Reply
Hi, The SLR 1.5 HP Pump Vertical Discharge (94027794) is compatible to your S15LR3S1 Pump.
Reply
What is GPM rate?
Reply
David- The SLR 1.5 HP Pump Vertical Discharge model 94027794 has a flow rate of approximately 65 gpm at 30 feet of head.
Reply
Does this include the motor and everything pictured?
Reply
Matt- The 94027794 SLR 1.5 HP Pump Vertical Discharge is the entire pump and motor as pictured.
Reply
I have a model 1LRC-5-48-51. Is this pump compatible with this model?
Reply
It could work. One has a cord and the other doesn't and one is a 1HP and the other is 1-1/2HP. As far as plumbing everything is the same but one of the motors gets wired and the other one you plug into an outlet.
Reply
I have a Pentair Dynamo, will this work the same? Will everything fit the same?
Reply
Hi, This pump can replace a Pentair Dynamo pump, if you have a union hose we will need to know the part number because it might not thread onto this pump.
Reply
We have a JACUZZI model #S15LR-3 with 1 1/2 HP for our above ground pool. It leaks through cracks and it has 3450 RPM. Is this the replacement for it? at least would it suit our needs?
Reply
Hi Joy, as long as your pump had the discharge port coming out of the top of the pump then this would be the correct pump. The discharge port is the port that has the hose going to the filter, sometimes this is located on the side.
Reply
what is the length overall and what is the inlet and outlet size, and are couplings included. flow chart please
Reply
Hi, George. The over all length is 21", the suction/discharge include both 1.5" FNPT and 1.5" straight union connection. The unions are sold separately, Union, S15uns Half, 1-1/2" Slip (31175607) PART#9173F .
Reply
What is the back pressure rating in gallons/minute for this pump?
Thanks!
Reply
Hi Dean, There is not a way to calculate back pressure unless it's installed. You can view the SLR Tech Sheet for performance info.
Reply
is there a reset switch on this part. Having problems with the system staying on. Had someone to come out and change the outlet but it appears that it system has blown it again. Please advise.
Reply
Hi, These pumps are not equipped with a reset switch, the motor could be bad causing it to short out.
Reply
will this work for my splash pak sand filter model SS160-S1B-6-HK6..i know it is a 1.5 hp ..the one i have now is a 1hp but i have had to replace it ever couple of years..so i though the 1 1/2hp might benefit better..thanks, Kay
Reply
The 1.5hp isn't going to last longer it will have more flow. It will also cost more to run. I would recommend you stay with your current pump and just replace the motor. Unless, you want more flow. I would need to know where your current flow is at psi wise. You can get that off the pressure gauge on your filter.
Reply
I have a 27 ft.(17000 gal.) above ground pool with a 2hp motor that needs replacing. Can I downsize to a 1 1/2 hp pump.
Reply
Hi, Coachd, Yes, you can downsize to a 1-1/2 HP pump if it can provide enough water flow to your pool. I don't think it will be an issue because most above ground pool is within 4 feet of the pool.
Reply
Hi, I Have the S15LR-6-HK with the horizontal discharge.. Is there any reason why I can"t replace it with the vertical discharge model and just redo the piping considering its almost half the price?? Thanx, Scott
Reply
Hi, Scott. Yes, you can use the vertical discharge pump and redo the plumbing. You will also have to elevate the filter for efficiency.
Reply
Need to replace pump , we have approximately a 13000 gallon above ground pool , currently a 1 hp motor is this particular motor to much or would it be a good choice . And what would be shipping time
Reply
Hi. Tony. This SLR pump can be used as a replacement if you have a large enough filter that can handle the water flow. This item is instock and will ship within 1 business day.
Reply
We have a 18 x33 above ground pool waterway pump 1 hp 115 volt , will this pump be ok to use
Reply
Hi Tony, You could use this pump but you will have a little bit of re-plumbing. I would suggest this 1.5 HP Waterway Above ground Pool Pump as the plumbing will be easier.
Reply
i have a jacuzzi s15lr-s 230v dual speed pump for an inground pool. What is the replacement?
Reply
The skimmer bottom broke during the night and the pump ran dry for several hours. The pump now makes a high pitch sound when running. Is there a place where I can lube either the pump or motor to see if that will help?
Reply
Hi, Danny. Lubricating the current seals will not resolve the problem, I would recommend replacing them using the Jacuzzi LR Series Tune Up Kit - GOKIT41. The high pitch sound could be the bearings failing inside the motor.
Reply
Will this SLR pump replace my Jacuzzi Model # S15LRDV pump? It's approx 25,000 gal inground pool?
Reply
Do you sell the quick couplings for the discharge and inlet on the SLR 1.5 HP Pump Vertical Discharge ?
Reply
Hi. You can use the Union, S15uns Half, 1-1/2" Slip (31175607) - B0602-15 with this Carvin Pump.
Reply
is this the correct replacement for 1LRC-5-48-S1/B ??
and do you ship this to King City, Ontario? total cost?
Reply
Hi, Valentin. This SLR pump will not replace the 1LRC. We do not sell a replacement for the 1LRC-5-48-S1/B.
Reply
can this pump replace my PENTAIR Dynamo 1 1/2 Hp for a 24ft round above ground pool
Reply
As far as voltage and strength the two match but being two different lines the housing designs will be different.
Reply
Can I replace Jacuzzi S15LR-3-S1 Pump with AO Smith 7-177760-23 motor 1.5Hp -- with -- SLR 1.5 HP Pump Vertical Discharge - 94027794?
The electrical spec is the same. The physical configuration seems similar. I need to make sure the hose connections are the same.
How many RPMs?
thank you,
Bill
Reply
Hi, Bill. You can use this pump as a replacement for your S15LR-3-S1 model pump.
Reply
Can you recommend a replacement pump for a Jacuzzi S15LRD? See attached pictures of the existing unit.
Thanks, Gregg
Hi Gregg, We would recommend the PureLine PL1502 1.5 HP Pure Pro XL as a replacement pump. Please note the PL1502 is 115V and comes with a standard 3 Prong plug.
Reply