?     Asked on 7/10/2015by jim martin

What voltage does this pump motor need
 Reply

A  Answered on 7/10/2015 by InyoPools Product Specialist Wes B.

Hi Jim, This pump is wired only for 115v
 Reply


?     Asked on 9/3/2015by Inyo Visitor

How many speeds
 Reply

A  Answered on 9/7/2015 by InyoPools Product Specialist Lennox H.

Hi, The SLR9 2 HP Above Ground Pump Vertical Discharge (94027513) is a single speed pump.
 Reply


?     Asked on 9/25/2015by Greg gaweda

How many gallons per minute does this pump push? With 70' of 1.5" waterline
 Reply

A  Answered on 9/30/2015 by InyoPools Product Specialist Lennox H.

Hi Greg, According to the SLR Flow Chart with 70' of pipe from a single suction line the flow rate will be about 5 GPM.
 Reply


?     Asked on 3/16/2016by Inyo Visitor

I have a 2HP Jacuzzi Pump model 2MF-S2, MFG No. 94026120 with PN 8-184951-03 motor. I don't think this unit would replace it. Do you have anything that is compatible?
 Reply

A  Answered on 3/17/2016 by InyoPools Product Specialist Lennox H.

Hi, The Jacuzzi Magnum Pump 2 1/2 HP Pump would be compatible with the Jacuzzi 2MF-S2 pump.
 Reply


?     Asked on 3/19/2016by Glenn Addis

I'm looking to replace my Jacuzzi SILR6 pump and motor. The label on the motor is partially rubbed off but shows "HP3" not sure if that would be a 3 or 3/4. I'm looking at the SLR9 2 HP Above Ground Pump Vertical Discharge (94027513) to replace it. I have a 35,000 gal above ground pool the discharge height through the filter into the pool is about 3 feet the pump sits right at the edge of the pool. Would this replacement pump be adequate?
 Reply

A  Answered on 3/22/2016 by InyoPools Product Specialist Lennox H.

Hi Glenn, This pump can be used on a 35,000 gallon above ground pool. You will have to make sure that your system can support the water flow. The SLR User Guide has all the performance info.
 Reply


?     Asked on 6/17/2016by Janet

Hi, I have to replace the whole system in my pool ( motor and strainer housing). The actual motor is a b130 2HP above ground. Can you recommend which one would be the one with the most value (efficiency/$) ? Thanks!
 Reply

A  Answered on 6/18/2016 by InyoPools Product Specialist Alex V.

Janet, Can you please provide the pump and filter model? If you purchased them together as a package, you may have issues replacing the pump as the connections can vary.
 Reply


?     Asked on 3/21/2017by Berthile P LeBoeuf

I 21' above ground intex pool. Will this pump work on it.
 Reply

A  Answered on 3/22/2017 by InyoPools Product Specialist Andy O.

Hello Berthile- What size is your filter?
 Reply


?     Asked on 4/22/2017by jim

will this 2 hp pump run a vacum
 Reply

A  Answered on 4/24/2017 by InyoPools Product Specialist Lennox H.

Hi, Jim. Yes, in most cases a 2hp pump is sufficed to operate an automatic or manual suction pool vacuum.
 Reply


?     Asked on 6/12/2017by Theresa

I have a Pentair 2 HP pump, 60 HZ, Amps 8.0/16.0 for 27' above ground approx 17,000 gal water. With this pump be sufficient and compatible. Need asap
 Reply

A  Answered on 6/22/2017 by InyoPools Product Specialist Lennox H.

Hi, Theresa. This pump is sufficient for a 17,000 pool if you have a large enough filter.
 Reply


?     Asked on 7/5/2017by Bridgit

What is the inlet size?
 Reply

A  Answered on 7/6/2017 by InyoPools Product Specialist Lennox H.

Hi, Bridgit. The Inlet and Outlet ports are 1-1/2". 
 Reply


?     Asked on 7/14/2017by Cody

Does this pump have a on/off switch on the back of it
 Reply

A  Answered on 7/15/2017 by InyoPools Product Specialist Alex V.

Cody, The pump does not have an on/off switch. 
 Reply


?     Asked on 4/24/2019by Duane Gibbs

Will this pump work on a 21ft above ground pool, with sand filter, & bear solar panel? Thank you, Duane
 Reply

A  Answered on 4/26/2019 by InyoPools Product Specialist Lennox H.

Hi, Duane. Yes, it can with a large enough filter.  
 Reply


?     Asked on 5/8/2019by Mark P

Would this work if replacing my broken Hayword Power-Flo LX sp1515 pump. Pool 30x15 x 4. Sand Filter it is S180T Pro Series. I guess what I'm asking, is if would work what would the 1/2 extra HP give me?
 Reply

A  Answered on 10/10/2019 by InyoPools Product Specialist Steve M.

Mark, no we would suggest the Power-Flo LX 1 1/2 HP, 115V, 1 Spd. Pump - W3SP1580X15 to replace your existing pump and pair to your Sand Filter with Top Mount Valve 18" Tank -S180T.
 Reply


?     Asked on 5/12/2019by Matthew

I have a 28' above ground pool, sand filter with a 1.5 hp Jacuzzi pump, model # S15LR-6, will this work
 Reply

A  Answered on 5/13/2019 by InyoPools Product Specialist Lennox H.

Hi, Matthew. This S2LR-6-S - 2 HP pump can be used if you have a large enough filter. 
 Reply


?     Asked on 5/31/2019by Becky Jolly

If I order soon can I get overnight shipping and if so what will it cost?
 Reply

A  Answered on 5/31/2019 by InyoPools Product Specialist Matt S.

Expedited orders placed after 1 PM EST will ship the following business day. Saturday, Sunday and National holidays are not classified as business days, for example if you placed an order via 2 Day Air on Thursday before 1 PM EST your order would be delivered in 2 business days which would mean delivery on Monday.
 Reply


?     Asked on 6/27/2019by Norman R. Craan

whats the GPM on the SLR9 pump
 Reply

A  Answered on 6/28/2019 by InyoPools Product Specialist Michelle B.

Hello, You will need to look at the pump curve on the pump with the total dynamic feet of head.http://www.inyopools.com/Blog/how-to-read-a-pool-pump-curve/
 Reply