?     Asked on 4/3/2016by ed buffman

does this part replace old part # 06099c six port paramount valve set?
 Reply

A  Answered on 4/4/2016 by InyoPools Product Specialist Lennox H.

Hi Ed, I was not able to cross reference p/n 06099C directly to this part but this will replace the Paramount Six Port water valve.
 Reply


?     Asked on 7/10/2016by RIck

Is this a factory original part and brand new?
 Reply

A  Answered on 7/11/2016 by InyoPools Product Specialist Alan M.

This is a Paramount manufactured part and is not used or refurbished. This part is new.
 Reply


?     Asked on 10/30/2016by Richard Trottier

I had this part replaced by my pool company in sept 2014 this unit does not work properly as one port is constantly on therefore not allowing proper pressure to the other ports when they open up I have a picture of the manufactured date 0f sept 2013 the serial # is 130090177 I think this part should last more than 2 years as it is not cheap What it the warrantee on this? and who do I bring it back to? Thanks Richard Trottier
 Reply

A  Answered on 10/31/2016 by InyoPools Product Specialist Stacey M.

Hello Richard, You can contact Paramount directly to see if they offer a certain type of warranty on parts and or could possibly have a tech come out to service the unit. Paramount Pool & Spa Systems295 East Corporate Place, Suite 100Chandler, AZ 85225 Toll Free: 1.800.621.5886 Phone: 480.893.7607 Fax: 480.753.3397 E-mail: paramount@1paramount.com
 Reply


?     Asked on 5/5/2017by Ernie

I am concerned about purchasing this 6 port module. Looking at the pictures the bottom of it looks different than my unit. My unit is about 7 years old. I took all the information off the module and it matches. I can send you a picture of the bottom if you would like. Do I need to worry? Please help. Thank You, Ernie Weber
 Reply

A  Answered on 5/5/2017 by InyoPools Product Specialist Lennox H.

Hi, Ernie. If the numbers match then this is the correct replacement. You can send photos by replying to this email so that we can confirm.
 Reply


?     Asked on 9/4/2017by RON

my paramount water valve is making a lot of noise. Two questions: any idea what is causing the noise? The mfg # on top of the unit is 0013004800xx, apparently 6 port module. approx. 10 years old ... can you identify replacement parts for this model and costs?
 Reply

A  Answered on 9/6/2017 by InyoPools Product Specialist Lennox H.

Hi, Ron. A loose gear or part could be the cause of the noise. This 6-Port Module - 004-302-4408-00 is the correct replacement for your water valve. 
 Reply


?     Asked on 9/4/2017by RON

update on question. The part# is correctly 0013004800xx ... the top of the water valve is a bit worn making the number difficult to read.
 Reply

A  Answered on 9/6/2017 by InyoPools Product Specialist Lennox H.

Hi, Ron. This  Paramount 6-Port Module - 004-302-4408-00 is the correct replacement module. 
 Reply


?     Asked on 8/28/2018by Ron

I need to winterize and close my pool but I need the air fitting expansion plugs for the module. I cannot locate them in your directory and I do not have a part number. Do you carry these plugs and if so can you direct me to the appropriate area where I can order them?
 Reply

A  Answered on 8/29/2018 by InyoPools Product Specialist Lennox H.

Hi, Ron. Reviewing the Paramount Winterizing Procedures does not mention an air fitting expansion plug. It does reference using the Water Valve Winter Plug - 004-302-1670-00. 
 Reply


?     Asked on 10/16/2018by RON

The Paramount valve #005-302-3590-00 is no longer available. Is there a replacement part? If so, number and price please.
 Reply

A  Answered on 10/17/2018 by InyoPools Product Specialist Hector F.

This part number comes up as a pressure gauge under alternate part number 3227-07. It is in stock with free shipping. 
 Reply


?     Asked on 2/11/2021by JC Ortiz

does this unit include the o-ring?
 Reply

A  Answered on 2/15/2021 by InyoPools Product Specialist Hector F.

Hi JC, yes this module comes with the base o ring. 
 Reply