I need a part for my Dolphin pool cleaner but I don't see it on the parts breakdown. Is there still a chance you may still have it?
Reply
The manufacturer which is Maytronics, does not offer all parts for sale. If you don't see a part on the breakdown you can give us a call. For parts that they do not consider "DIY (do it yourself), you will need to contact them and send in the cleaner for repair.
Reply
Front and back rollers keep coming off. Installed them back on and pool cleaner DX3 runs for awhile just fine and then the rollers come off again. Could it be that the gray timing tracks need to be replaced????
Reply
Hi, It's possible that the tracks are worn, I would inspect the inside tracks to see if its worn.
Reply
Hi, Its been 2 years since I used DX3. Need to change this track ? seems working fine. I used DX3 once a day for last 2 years.
Also is it easy to change ? I need to disassemble the units very far to replace those belts ? Tks
Reply
Hi Mike, If the tracks are worn, disintegrating or you feeling like time to replace it you can. It's not hard to replace, instructions can be found in our How To Replace Maytronics Dolphin Nautilus Tracks guide.
Reply
My dx3 has two different length timing tracks. on is an idler and one the drive. I have had it apart. You do not appear to have both. Do you?
Reply
My dx3 has two different length timing tracks. on is an idler and one the drive. I have had it apart. You do not appear to have both. Do you?
Reply
My dx3 has two different length timing tracks. on is an idler and one the drive. I have had it apart. You do not appear to have both. Do you?
Reply
There is one kind of timing track on that cleaner. If one is longer than the other than one has been stretched because they should be the same, part number 3295-133.
Reply
My dx4 seems to steer to the left when going forward and alsi in reverse. It seems like one side is tracking slower than the other. Could this mean it needs new timing tracks?
Reply
Hi, Jared. It's possible that the timing track could be worn or it could be something else.
Reply
I am replacing the tracks on a Dolphin DX5S
is the one I need or is there one that is less expensive?
Reply
Hi, Jason. This is the correct replacement Tracks for the Dolphin DX5S, there is not an alternate replacement.
Reply
I have a dolphin supreme M4. Will this fit? If not what part number do I need?
Reply
Hi, Karen. This Timing Track, Gray (Set of 2) - 9985006-R2 will fit the Dolphin Supreme M4 cleaner.
Reply
Will this track fit a Dolphin pro
Reply
Hi. Yes, these are the correct track for the Maytronics Dolphin Pro.
Reply
I have a dolphin endeavor. I bought tracks for it at my local pool company but the drive track seems to be to short. Are the tracks two different sizes? Rhanks
Reply
They are coming to us as a package of 2 that are the same size but the parts diagram shows 2 different sizes.
Reply
Can you tell me what size the drive track is on the diagram
Reply
Hi Sally, Please click this link here for Dimensions of Dolphin Endeavor Short Track 9985015 This track is listed as Key #15 on the Dolphin Endeavor Parts Diagram and can be purchased through this link here Dolphin Endeavor Short Track 9985015
Reply
Set of 2?
Fit Nautilus cc Plus?
Do they come in white?
Thanks!
Reply
Hi. This is NOT the correct replacement tracks. You will need P/N 9983152-R2.
Reply
Hello
I need the newer style Track Belt for my Dolphin Diagnostic, (With ribs that go all the way across instead of the Nubs)
I am ordering the Drive wheel to accept this belt, but little unsure of which belt will work.
Thanks
Reply
please send me dimensions for this belt
thank you
Reply
DIMENSIONS are as followed 12" L X 12" W X 1" D
Reply
can this work on dolphin dx3 maytronics 158889LSAG
Reply
Yes, the Timing Track, Gray (Single) - 9985006-R2 can be installed on the Maytronics Dolphin DX3. You may view other parts here http://www.inyopools.com/pool_parts_maytronics_dolphin_dx3.aspx
Reply