Put in all new filter grids. i purchased from you, the DE keeps coming in pool. do I also need manifold?
Reply
Hi Maurjo, The manifold would be the next part I would replace, we also a have good article on Getting DE Powder Back in Your Pool which goes into the common items to check when getting DE powder in your pool.
Reply
Hi. I have an older American Products "Titan" Model # 56623100 (48 sq ft). Will this manifold fit that model? Thanks in advance for your help.
Reply
I have a Purex Triton FNS 36 filter on my pool. Will this Manifold fit my filter. My manifold has a small crack on it so I will need a new one next time I clean my filter.
Reply
Yes sir, that will fit that filter.
Reply
Hi I have an aquatech D.E. filter that was installed in 1998 for the past two years it has been leaking D.E. back into the pool . Last year I replaced the grids and by researching i feel like the manifold is next to replace . It doesnt appear aquatech is in business anymore and pentair sells some replacement parts for these. the pic you have looks similar to mine. How can i find out if this would be the right part?
Reply
Hi Laura, In order to locate the correct manifold you need we will need to know the model of the AquaTech Filter and or the part number of the manifold.
Reply
Will this fit a nautilus plus nsp36?
Reply
Hi Veronica, This manifold is not compatible with Nautilus Plus Stainless D.E. NSP36 filter, the Manifold, Grid W/screen (192193) is the correct one that will fit that unit.
Reply
Will this manifold work on a Pentair FNS Plus 60" filter? Are there generic 60" grids which would work well on my 60" filter?
Reply
Hi, James. Yes, this manifold along with the 60 Sq. Ft. Grid Pack (7 Full & 1 Partial) - FG1005PACK will fit the Pentair FNS Plus 60.
Reply
I am looking to buy this "Generic Manifold, Top w/ Air Bleed (replaces 59023700, 59000400) - 25357-600-000" it says with air bleed, but doesn't show where it bleeds from.
Reply
Hi, Kenny. The Air Bleeds from the small rectangle box on the outlet pipe connector of the manifold.
Reply
Will this generic manifold fit my American Titan Vertical Grid Model 584090 ?
Also the old manifold has a top relief, so do I need to order that part as well?
Reply
Hi, Kiki. Yes, this Generic Manifold - 25357-600-000 will fit the American Titan Vertical Grid Model 584090 filter. This manifold has a built-in air relief so you do not need to purchase one.
Reply
We had a technician install this manifold on our Purex Triton Nautilus FNS 48 Filter. Now the lid doesn't close properly, and we are getting DE back into the pool. In addition, the DE is not adhering to the grids.
Is it possible that this is the wrong manifold?
Hi, Jeff. This is NOT the correct manifold for the Triton Nautilus FNS Series Filter. The correct one is P/N 192173.
Reply
Hi there. Thanks for the prompt answer. So the technician came back yesterday while I wasn't home. It appears he installed mainfold 192193. I am wondering - is the only difference between 192193 and 192173 the extension, part no. 192165? The two manifolds look very similar, and if it is only the extension that is added then I will just get that, rather than having the technician come and swap it out again. Thanks!
Reply
I am using this as a replacement on my Pentiar FNS 48. I do not see how the air bleed which is round on the old one (see picture) would fit onto this replacement which is a square slot.
This generic manifold does not actually have an air bleed location on it and is not required.
Reply
So just to be clear... I do not need the internal air bleed assembly with this replacement? I would just install this replacement and it would bleed the air in similar fashion as the old one without the internal bleed assembly?
Reply
Yes, that is correct. Also as a tip, you can always place your multiport valve(assuming you have one) into the waste position to discharge the air from the filter then place back into the filter position once completed. Always turn off the pump when moving the valve position.
Reply
I have a Purex Triton 500 PT5048. Will this manifold fit. If not could you advise a replacement. THANKS
Hi Peter, Yes this is the correct replacement manifold for the Purex Triton 5000 PT5048
Reply
Does this fit he DE3600 filter.
Reply
I have a 29 year old PacFab DE filter system FNS 48 that has several cracks allowing DE to enter into the pool.
I ordered what I thought was a replacement from another company, but it does not fit. Does your generic upper manifold with air bleed replace manifold P/N 192173 ?
Reply
Hi Bob, We have not test the generic manifold the older FNS filters. To be on the safe side we would suggest this Original 192173 FNS Manifold
Reply
Will the Generic Manifold Top w/ Air Bleed For American Products... (replaces 59023700, 59000400) - 25357-600-000) be suitable to fit & replace the Manifold Top in our American Titan Model # 584090? Thanks
Reply
Hi David, yes, the Generic Manifold Top w/ Air Bleed For American Products & Pentair Filters - 25357-600-000 is the generic version of the OEM Manifold Top - 59000400 and will fit your American Products Titan Stainless Steel D.E. filter perfectly.
Reply
Does this product not require the air bleed tube.
If needed how does it connect.
Thanks John
Reply
Hello John, this manifold does not require an air bleeder tube. I have also emailed you an estimate that you can convert to an order if you would like. Item is currently in stock and ready to ship.
Reply