?     Asked on 5/6/2015by Gretchen

I was told I need a Pentair 2" check valve 263042. is this it? Also need Hayward tank adapter de2400pac2cs. Do you have one?
 Reply

A  Answered on 5/7/2015 by InyoPools Product Specialist Patrick P.

Hi Gretchen, this particular valve is not the Pentair 263042 Check Valve however we do carry the Pentair 263042 Check Valve. We also carry a Generic Version of the Pentair 263042 which will save you some money. For the Hayward tank adapter part # of de2400pac2cs can you double check this number as this is not showing as a good prat # with Hayward, please email us back with what you come up with.
 Reply


?     Asked on 12/9/2015by Tom

What is the overall length of the 1-1/2" valve?
 Reply

A  Answered on 12/14/2015 by InyoPools Product Specialist Brian M.

The overall length of the 1-1/2" valve is, according to the rep of the manufacturer, approximately 8".
 Reply


?     Asked on 6/12/2017by Rich

Can this be installed vertically or only horizontally?
 Reply

A  Answered on 8/5/2017 by InyoPools Product Specialist Alex V.

Rich, Yes, the valve can be mounted vertically. The flow of the water must be moving up. The flow of the water cannot be moving down.
 Reply


?     Asked on 12/11/2017by Tim

I have a variable speed pump that runs at low RPM most of the time. This reduces check valve flow and causes spa waterfall to run at a trickle. Would the 2 lb spring pressure be too much to overcome at low pump speeds? Is a 0.5 lb spring available in this model?
 Reply

A  Answered on 12/12/2017 by InyoPools Product Specialist Lennox H.

Hi, Tim.  A 2Lb check valve can be too strong for a variable speed pump running at low rpm's to engage completely. A 1/2 lb spring check valve will require less water flow than the 2lb. 
 Reply


?     Asked on 5/8/2019by GP

Is this good for 1.5" pipe on both the inlet and outlet side. Thanks!
 Reply

A  Answered on 5/8/2019 by InyoPools Product Specialist Joe S.

Yes, this would be perfect for 1.5" pipe.
 Reply


?     Asked on 8/8/2019by Bill

Would this valve be good for a Hayward Super II 2 hp #SP3015X20AZ? I want to install before the pump to guard against losing prime? Could I also install a 2nd one before the in line chlorinator?
 Reply

A  Answered on 8/9/2019 by Industry Professional

Hi Bill, You can use this in front of the pump just place it as far away as possible to hold water in the line. Normally you would not need a check valve here unless you constantly were loosing prime as this is a self priming pump. you can put a check valve between the pump and the chlorinator
 Reply


?     Asked on 8/6/2021by B

Is this compatible/interchangeable with the Jandy 7235 Check Valve?
 Reply

A  Answered on 2/8/2022 by InyoPools Product Specialist Joe S.

Good day, yes this would be a good replacement for the Jandy unit.
 Reply