Is the salt included with the salt chlorine generator?
Reply
No, salt is not included. You would purchase the salt locally and the quantity will depend upon the number of gallons of water in your pool. Use a salt that is at least 99.8% pure NaCl. The preferred salt is evaporated, granulated, food quality, and NON-iodized. Avoid using salt with anti-caking agents like sodium ferrocyanide, also known as yellow YPS (prussiate of soda). These cause some discoloration of fittings and pool surface finishes. DO NOT use calcium chloride.
Reply
Does this model allow the slotted Jandy flow and temp transmitter to fit properly
Reply
Yes this model does accommodate the Jandy slotted flow and temperature sensor. You will use your current flow sensor and this sensor is placed into the bottom port of the cell, you will then use the union from your current cell to secure the flow sensor to the bottom port of the new cell. The only difference between these and the original is that the power cord is integrated into this cell.
Reply
My Jandy 3 port cell this will replace has a plug on the side. I see in the pictures this one does not have the plug. Are they available seperately?
Reply
Most likely your Jandy cell has two cables coming out of it. One is called the Power cable and on the Jandy original this plugs into 3 prongs coming off of the salt cell. For the new aftermarket cell you will no longer use your Jandy cable as the aftermarket cell comes with a power supply cable that is integrated directly into the cell and will plug into your power supply. The second cable coming off of your Jandy cell is the flow sensor cable this will come out of the bottom port of the cell. When using this aftermarket cell you will unscrew your the flow sensor from your old Jandy cell and screw that sensor into the new cell.
Reply
Does the aftermarket Jandy 3 Port Cell come with unions?
Reply
No the unions are not included, you would use the unions off of your old Jandy AquaPure salt cell and use those unions on the new cell as they are a perfect match. If for some reason you need new Unions then here are the Jandy AquaPure Replacement Unions.
Reply
Does this salt cell come with the flow sensor that comes out of the bottom of current Jandy cell?
Reply
No the flow sensor is not included. You will use the Jandy aqua pure flow sensor from your current Jandy salt cell, simply unscrew the flow sensor from the old cell, place the flow sensor in the bottom port of the new salt cell and secure with the union from your old cell.
Reply
My current Jandy configuration has the sensor on the side treads and the sensor water flows vertically. I have not been happy with the Jandy salt chlorinator. Is it possible the performance will be better with this cell?
Thank you
Reply
Hi, Bill. The performance of the system will not be better using this cell.
Reply
I have an Aquapure 1400 system, but the pool size is only 13,000 gal. Can I replace the 1400 cell with the After Market) - GRCJ12-3 which is basically the 700 cell? I understand it will make less chlorine, but will it physically fit into the same plumbing configuration as a 1400 cell and will the existing sensor work the same? Will it need to be recalibrated or are there any settings changes or firmware changes required?
Reply
Unfortunately not, you will require the use of the 1400 Cell Kit 3 Port, W/ Sensor, Orings & 16' Cord (plc1400).
Reply
APUREM power center is displaying errcr code 124 when replacing the original Jandy 700 PLC Cell. No errors are displayed with the original cell. Does the Cell requires some type of recalibration or it is plug and play?
Reply
Hi, Jorge. This is a plug and play replacement for the OEM 700 cell. Error Code 124 indicates high current indicated at the cell - this usually means a bad PIB.
Reply
